The OBD code B10D7 indicates a problem with the Passive AntiTheft System (PATS) key not being programmed or a faulty Body Control Module (BCM).
Symptoms include the Engine Light being ON.
To fix this, review the possible causes mentioned, visually inspect the wiring harness and connectors for damage, and check for broken, bent, or corroded connector pins.
This issue should be addressed promptly to ensure proper vehicle operation.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b10d7 OBD Code
The vehicle displays a fault code B10D7 related to a particular electrical issue.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Vehicle may experience issues with the audio system.
- Steering wheel controls may not function properly.
Causes of the b10d7 OBD Code
Possible triggers for fault code B10D7 include issues with the passenger airbag indicator circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- B10D7 can be caused by a PATS key not programmed.
- A faulty Body Control Module (BCM).
Fixing Error Code b10d7 Step By Step
To resolve fault code B10D7, inspect and repair the driver’s door ajar switch circuit.
- To fix OBDII code B10D7, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider resetting the module that corresponds to the code.
- Perform any necessary software updates or module replacements as required to address the fault code.
Cost Of Fixing b10d7 Fault Code
Diagnosing and repairing fault code B10D7 may involve replacing the passenger airbag module.
The cost to diagnose and fix OBD code B10D7 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the b10d7 OBD Code
B10D7 code indicates a fault in the passenger airbag indicator circuit.
OBD code B10D7 indicates an issue with the passenger compartment temperature sensor.
This code is triggered by the Body Control Module (BCM) when it detects a fault with the passenger compartment temperature sensor circuit.
The passenger compartment temperature sensor is responsible for monitoring the interior temperature of the vehicle to help regulate the climate control system.
When this sensor malfunctions or its circuit is compromised, the BCM sets code B10D7 to indicate the problem with the sensor or its circuit.
Mechanic’s Tech Notes
This code indicates a fault with the passenger airbag status indicator circuit.
OBDII code B10D7 indicates an issue with the transmission control module (TCM) power circuit.
To diagnose, use a multimeter to check TCM power and ground connections for proper voltage and continuity.
Utilize a scan tool to confirm TCM communication over the Controller Area Network (CAN) bus.
Visually inspect wiring harnesses and connectors for damage, focusing on pin connections for signs of corrosion, bending, or breakage.
If no visible issues are found, consider reprogramming the TCM.
FAQ
OBD code B10D7 indicates a PATS key not programmed or a faulty BCM. Check wiring harness, connectors, and component damage for repair.
Common symptoms for OBD code B10D7 include Engine Light ON, caused by PATS key not programmed or faulty BCM. Fix: Inspect wiring, connectors, and components for damage.
Diagnose OBD code B10D7 by checking PATS key programming, BCM functionality. Inspect wiring for damage, connector pins for issues. Repair as needed.
Wrap Up
If your vehicle is displaying OBD code b10d7, you may experience issues with the airbag system, such as an airbag warning light on the dashboard or nondeployment in case of an accident.
This code typically indicates a problem with the passenger airbag indicator circuit, which could be caused by a faulty passenger airbag indicator sensor, damaged wiring, or poor connections.
To address OBD code b10d7, start by inspecting the wiring harness and connectors related to the passenger airbag indicator sensor.
Look for any signs of wear, corrosion, or damage that may be affecting
