[SOLVED] P16A5 Code: Fix Time Out Control Module Output Bus Issue!

The automobile fault code P16A5 indicates a problem with the Time Out Control Module.

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty Time Out Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the p16a5 fault code appears, the Engine Light will illuminate, indicating a potential issue with your vehicle.

  • The symptoms of the automobile fault code p16a5 include the Engine Light being ON and the Service Engine Soon Warning Light being illuminated.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

The automobile fault code p16a5 can be caused by a faulty Time Out Control Module, an open or shorted Time Out Control Module harness, or a poor electrical connection in the Time Out Control Module circuit.

  • The fault code P16A5 can be caused by the following: 1.
  • Faulty Time Out Control Module.
  • 2.
  • Time Out Control Module harness is open or shorted.
  • 3.
  • Time Out Control Module circuit has a poor electrical connection.

To fix the automobile fault code p16a5, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p16a5, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p16a5 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P16A5 fault code refers to a problem with the Time Out Control Module in the automobile’s Engine Control Module (ECM). The ECM constantly monitors this module and triggers the OBDII code when it detects that the Time Out Control Module is not functioning according to the factory specifications. This fault code is specifically labeled as “Time Out Control Module Output Bu.

What are the possible causes for the automobile fault code P16A5?

If you see the engine light or service engine soon warning light on, the fault code P16A5 could be the culprit. This code is often caused by a faulty Time Out Control Module or issues with the module’s harness, such as an open or shorted circuit. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken or bent pins. By addressing these possible causes, you can get your automobile back on track.

How can I visually inspect the wiring harness and connectors to fix the P16A5 fault code?

If you’re dealing with the P16A5 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Time Out Control Module or issues with the wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying and resolving the problem. Don’t delay, get to the bottom of it now!

What should I look for when checking for damaged components and connector’s pins to resolve the P16A5 fault code?

When resolving the P16A5 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection and lead to the engine light being on. By addressing these potential causes, you can effectively fix the problem and ensure optimal performance of your vehicle.

p16a5 error fault code explained

If your engine light is on, it could be due to a faulty Time Out Control Module or issues with the module’s harness or circuit connection.

To fix this, visually inspect the wiring harness and connectors for any damage.

Also, check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top