The automobile fault code P0C48 indicates a problem with the Hybrid Battery Pack Coolant Pump. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty Hybrid Battery Pack Coolant Pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this problem is estimated to be 1.0. To interpret the fault code, you need to check the “Possible Causes” listed above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the p0c48 fault code appears, the Engine Light will illuminate, indicating a potential issue with your vehicle.

  • The symptoms of the automobile fault code p0c48 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c48 can be caused by a faulty hybrid battery pack coolant pump, an open or shorted harness, or a poor electrical connection in the coolant pump circuit.

  • The fault code P0C48 can be caused by the following: a faulty hybrid battery pack coolant pump, an open or shorted harness for the hybrid battery pack coolant pump, and a poor electrical connection in the hybrid battery pack coolant pump circuit.

To fix the automobile fault code p0c48, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c48, you need to first check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c48 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0c48 fault code.

The P0C48 fault code refers to a problem with the Hybrid Battery Pack Coolant Pump Control Circuit.

The Engine Control Module (ECM) is responsible for monitoring this component. When the ECM detects that the Hybrid Battery Pack Coolant Pump is not operating within the factory specifications, it triggers the P0C48 fault code.

This code indicates that there is a low voltage or resistance issue in the control circuit of the Hybrid Battery Pack Coolant Pump.

It is important to address this issue promptly to ensure the proper functioning of the hybrid battery system.

What are the possible causes of the automobile fault code p0c48?

If you see the engine light on or the service engine soon warning light, the fault code P0C48 could be the culprit. This code is often caused by a faulty hybrid battery pack coolant pump, an open or shorted harness for the coolant pump, or a poor electrical connection in the coolant pump circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the p0c48 fault code?

If you’re dealing with the p0c48 fault code and your engine light is on, it’s time to take action. The most likely cause is a faulty Hybrid Battery Pack Coolant Pump or issues with the wiring harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the issue. Don’t delay, get to the bottom of the problem and get your engine running smoothly again.

What should I look for when checking for damaged components and connector pins to resolve the p0c48 fault code?

To resolve the p0c48 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a faulty Hybrid Battery Pack Coolant Pump or poor electrical connection. By checking and addressing these possible causes, you can fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.

p0c48 error fault code explained

If your engine light is on, it could be due to a faulty Hybrid Battery Pack Coolant Pump or issues with the wiring harness and connectors. To fix it, visually inspect the wiring and connectors for any damage or corrosion. Look out for broken or bent pins.

Check the “Possible Causes” mentioned above for more details.

Scroll to Top