If you see the engine light on or the service engine soon warning light, it could be due to the P1FC2 fault code. This code indicates a problem with the HybridEV Battery Interface Control Module, which could be faulty or have a poor electrical connection.

It’s important to address this issue promptly as it could affect the performance of your vehicle. The repair time for this fault code is estimated to be around 1.0 hour. To fix the issue, you should visually inspect the wiring harness and connectors, and check for any damaged components or corroded pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of p1fc2 fault code. Here are the symptoms to look out for:

  • The P1FC2 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include reduced engine power, decreased fuel efficiency, rough idling, stalling, and difficulty starting the engine.
  • Additionally, the vehicle may experience a decrease in acceleration or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The P1FC2 fault code can be caused by a faulty control module, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1FC2 can be caused by a faulty Hybrid/EV Battery Interface Control Module.
  • It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module harness.
  • Additionally, a poor electrical connection in the Hybrid/EV Battery Interface Control Module circuit can also trigger this fault code.

To fix the automobile fault code p1fc2, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code p1fc2, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code P1FC2 based on the estimated repair time of 1.0 hour are: – The hourly rate charged by the auto repair shop, which can range from $75 to $150 per hour. – The complexity of the issue causing the fault code, which can affect the time required for diagnosis and repair. – The availability of replacement parts, which can impact the cost of the repair. – The expertise and experience of the mechanic performing the repair, which can affect the efficiency and accuracy of the diagnosis and repair process.

The P1FC2 fault code is related to the HybridEV Battery Interface Control Module. This fault code is triggered when the module detects a fault condition within its own systems. The fault is internal to the module and does not involve any external circuits. The code specifically refers to the HybridEV Battery Interface Control Module 10 Performa.

What are the possible causes of the P1FC2 automobile fault code?

If you’re experiencing the P1FC2 fault code, your engine light may be on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection in the circuit. To fix the issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

How can I fix the P1FC2 automobile fault code?

If you’re experiencing the P1FC2 fault code, your engine light may be on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection. To fix this issue, visually inspect the wiring harness and connectors, checking for any damaged components or broken, bent, pushed out, or corroded connector pins.

What should I visually inspect to troubleshoot the P1FC2 automobile fault code?

If you’re experiencing the P1FC2 fault code, you may notice that your engine light is on. This could be due to a faulty Hybrid/EV Battery Interface Control Module, an open or shorted harness, or poor electrical connection. To troubleshoot this issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out pins on the connectors.

p1fc2 error fault code explained

If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module, an open or shorted harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top