The OBD code C1336 for Toyota indicates an issue with the Acceleration Sensor Calibration in the AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
This can be caused by faulty sensors, wiring harness issues, or a malfunctioning Skid Control ECU.
While it affects safety systems, it can be fixed by inspecting and repairing the sensors, wiring, and connectors involved.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Toyota c1336 OBD Code
The vehicle may experience issues with the engine control module communication circuit.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of traction control functionality.
- Unusual noises from the ABS system during braking.
- Difficulty maintaining stability when braking on slippery surfaces.
Causes of the Toyota c1336 OBD Code
Possible triggers for Toyota fault code C1336 include ABS sensor issues and wiring faults.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C1336 can be caused by incorrect Acceleration Sensor Calibration.
- Improper Sensor installation.
- A Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly).
- An open or shorted Airbag Sensor Assembly harness.
- A poor electrical connection in the Airbag Sensor Assembly circuit.
- A Faulty Skid Control ECU (Brake Actuator Assembly).
Fixing Toyota Error Code c1336 Step By Step
Replace the skid control ECU to address Toyota fault code C1336.
- To fix the Toyota OBDII code C1336, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wheel speed sensor wiring and connections for any issues.
- Test the wheel speed sensors for proper operation and replace any faulty sensors.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to ensure the ABS system operates correctly and verify that the C1336 trouble code does not return.
Cost Of Fixing Toyota c1336 Fault Code
The repair for Toyota fault code C1336 typically involves replacing the skid control ECU.
The cost to diagnose and fix Toyota OBD code C1336 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Toyota c1336 OBD Code
C1336 in a Toyota indicates a problem with the engine’s crankshaft position sensor circuit.
OBD code C1336 for Toyota vehicles indicates a crankshaft position sensor circuit malfunction.
This code is triggered by the Engine Control Module (ECM) when it detects an issue with the crankshaft position sensor signal.
The crankshaft position sensor is responsible for monitoring the position and speed of the crankshaft in the engine.
When the sensor malfunctions or sends erratic signals, the ECM sets code C1336 to alert the driver or technician of the problem.
Mechanic’s Tech Notes
For Toyota code C1336, check for possible issues with the engine speed sensor or wiring.
OBDII code C1336 in a Toyota typically indicates an issue with the crankshaft position sensor circuit.
To diagnose, use a multimeter to check the sensor’s resistance and voltage output.
Inspect the sensor and its wiring for any damage or corrosion.
Ensure the sensor is properly aligned and has the correct air gap.
Use a scan tool to monitor sensor data and confirm proper operation.
If all checks out, consider reprogramming the engine control module.
Remember to clear the code after repairs are made.
FAQ
OBD code C1336 in a Toyota means a fault with the Acceleration Sensor Calibration. Check sensor installation, wiring harness, connectors, and Skid Control ECU for issues.
Symptoms of C1336 in a Toyota: ABS Warning Light ON, Engine Light ON. Causes: Acceleration Sensor Calibration, Faulty Yaw Rate Sensor. Fix: Inspect wiring, connectors, components.
Diagnose and fix C1336 in a Toyota: Symptoms ABS & Engine Lights ON. Causes Sensor calibration, faulty sensors, harness issues. Fix Inspect wiring, connectors, and components for damage.
Wrap Up
If your Toyota is experiencing OBDII code C1336 along with ABS warning lights, it may indicate issues with the engine speed sensor or the wiring harness connecting to it.
This can lead to traction control and ABS system malfunctions.
To address Toyota OBDII code C1336, check the engine speed sensor for proper operation and inspect the wiring harness for any damage or loose connections.
Ensure the sensor is securely mounted and replace it if necessary to restore proper ABS and traction control functionality.
