The P1E64 automobile fault code indicates a problem with the HybridElectric Vehicle Battery Pack or the Battery Interface Control Module. The most common symptom is the Engine Light turning on. The cause of this issue is a faulty battery pack or control module.
It is important to address this issue promptly as it can lead to further damage to the vehicle. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the problem, one should visually inspect the wiring harness and connectors for any damage or corrosion.
It is also recommended to check for broken, bent, or pushed out connector pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1E64: Unresponsive Accelerator Pedal – Symptoms Explained
If you notice the engine light on or service engine soon warning light, it could be a sign of P1E64 fault code.
Here are the symptoms to look out for:
- The P1E64 fault code in automobiles can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding P1E64: Common Causes Of The Fault Code
The P1E64 fault code can be caused by a faulty battery pack or battery interface control module in hybridelectric vehicles.
- The automobile fault code P1E64 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- It can also be caused by a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
- These are the only two causes of the P1E64 fault code.
Fix Code P1E64: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p1e64, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code P1E64, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: Fixing P1E64 Code Complexity & Cost
The fault code P1E64 indicates an issue with the hybrid battery pack coolant pump control circuit. The estimated repair time for this fault is 1.0 hour. The cost of fixing this fault will depend on the hourly rate charged by the auto repair shop.
The average hourly rate is between $75 and $150. Therefore, the cost of fixing the P1E64 fault code will range from $75 to $150.
P1E64: Your Car’s Battery Is In Trouble
The P1E64 code refers to a fault in the HybridElectric Vehicle Battery 57 Circuit.
The battery pack contains 288 cells grouped in parallel and series. The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybridEV battery interface control modules. The battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2 through serial data.
The hybridEV powertrain control module 2 is the host controller for diagnostic trouble code information.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the P1E64 fault code. This code is caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P1E64 fault code, which is indicated by the engine light or service engine soon warning light turning on, you may have a faulty hybrid/electric vehicle battery pack or interface control module. To fix this issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action to take.
Ignoring the P1E64 fault code, which indicates a faulty hybrid/electric vehicle battery pack or interface control module, can lead to serious consequences. The engine light will remain on, and the vehicle may experience reduced performance, decreased fuel efficiency, and even complete failure. It is crucial to address the issue promptly by visually inspecting the wiring harness and connectors and checking for damaged components to avoid further damage and costly repairs.
Wrap Up
If your engine light is on, it could be due to a faulty hybridelectric vehicle battery pack or interface control module. Check the possible causes, inspect wiring and connectors, and look for damaged components or corroded pins.
