OBD code P0322 indicates an issue with the Ignition/Distributor Engine Speed Sensor Circuit.
Symptoms include the Engine Light ON, lack of power, hard starting, engine stumbling, or stalling.
Causes may include a faulty sensor, wiring issues, low battery charge, or a faulty ECM.
This is a serious issue that requires immediate attention.
A possible fix involves checking and repairing the sensor circuit and related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the p0322 OBD Code
The vehicle may experience issues related to the ignition/distributor engine speed sensor circuit.
- With OBD code P0322, the Engine Light will be ON.
- Lack/Loss of Power may be experienced.
- The engine may be harder to start.
- The engine may stumble or stall.
Causes of the p0322 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P0322 code typically indicates an issue with the ignition/distributor engine speed input circuit.
- P0322 can be caused by a Faulty Ignition/Distributor engine speed sensor.
- A Ignition/Distributor engine speed sensor harness that is open or shorted.
- An Ignition/Distributor engine speed sensor circuit with poor electrical connection.
- A Faulty Crankshaft Position sensor.
- Low battery charge.
- A Faulty Engine Control Module (ECM).
Fixing Error Code p0322 Step By Step
Replace faulty ignition/distributor engine speed sensor to address P0322 code.
- To fix OBDII code P0322, first, review the possible causes related to the crankshaft position sensor circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the crankshaft position sensor for proper operation and signal output.
- Replace the crankshaft position sensor if necessary.
- Clear the fault codes and perform a road test to verify the repair.
Cost Of Fixing p0322 Fault Code
Diagnosing and repairing fault code P0322 typically involves testing and replacing the ignition/distributor engine speed sensor.
The cost to diagnose and fix OBD code P0322 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p0322 OBD Code
Fault code P0322 relates to the ignition/distributor engine speed input circuit having no signal.
OBD code P0322 means that the Engine Control Module (ECM) has detected a low input signal from the Ignition/Distributor Engine Speed Input Circuit.
This code is triggered when the ECM does not receive the proper signal from the ignition/distributor reference circuit.
In simpler terms, this code indicates that there is an issue with the ignition/distributor reference signal that the ECM needs to determine engine speed.
This signal is crucial for proper engine operation and timing control.
If the ECM does not receive a valid signal, it will trigger a P0322 fault code.
Mechanic’s Tech Notes
Code P0322 indicates an issue with the ignition/distributor engine speed input circuit.
To diagnose and fix OBDII code P0322, which indicates an issue with the Ignition/Distributor Engine Speed Input Circuit, start by checking the wiring harness and connectors for any damage or corrosion.
Use a voltmeter to test the power and ground connections to the ignition/distributor.
Ensure the connector pins are not broken, bent, or corroded.
Use a scan tool to monitor the engine speed signal while cranking the engine.
If the signal is erratic or absent, the crankshaft position sensor or its wiring may be faulty.
Replace the sensor if necessary.
Reflash the engine control module if no other issues are found.
FAQ
Common symptoms of OBD code P0322 include Engine Light ON, lack of power, hard starting, engine stumbling/stalling. Causes may include faulty sensors or ECM. Fix: Inspect wiring/connectors for damage.
Typical cause of OBD code P0322: Faulty Ignition/Distributor engine speed sensor, open/shorted harness, poor connection, faulty Crankshaft Position sensor. Check wiring/connectors for damage.
Diagnose and repair OBD code P0322 by checking the ignition/distributor engine speed sensor, harness, and connections for faults. Inspect wiring for damage or corrosion.
Wrap Up
If your check engine light is on and your engine is experiencing erratic ignition timing, it could be due to OBDII code P0322. This code typically indicates a problem with the ignition/distributor engine speed input circuit, such as a faulty crankshaft position sensor, damaged wiring, or poor connections.
To address OBDII code P0322, start by inspecting the wiring harness and connectors related to the crankshaft position sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace it if necessary to restore accurate engine speed input data
