The automobile fault code U1087 indicates a problem with a module that is not communicating properly.

This can cause the engine light to turn on, indicating a need for service. The cause of this issue could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of u1087 fault code.

Here are the symptoms to look out for:

  • The automobile fault code U1087 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The automobile fault code u1087 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.

  • The automobile fault code U1087 can be caused by a faulty module that is not communicating.
  • It can also be caused by an open or shorted module harness.
  • Additionally, a poor electrical connection in the module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code u1087, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u1087, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code U1087 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the U1087 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U1087 code is related to the class 2 serial data circuit in automobiles.

Modules monitor serial data communications during normal vehicle operation.

If a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1087 Diagnostic Trouble Code (DTC) is set. This code specifically indicates invalid or missing data for primary I.

What are the possible causes of the u1087 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u1087 automobile fault code. This code is usually caused by a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the u1087 fault code?

If you’re experiencing the u1087 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. The cause of this issue could be a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To address these issues, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What are the signs of damaged components that I should look for when fixing the u1087 fault code?

If you’re dealing with a u1087 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. The cause of this issue could be a faulty module that isn’t communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To fix this problem, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

u1087 error fault code explained

If your engine light is on and you have a u1087 fault code, it could be due to a faulty module or poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins.

Scroll to Top