If you see the engine light or service engine soon warning light illuminated on your dashboard, it could be due to the automobile fault code P0C56.

This code indicates a problem with the hybrid vehicle motor. The possible causes include a faulty hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c56 fault code.

  • The symptoms of the automobile fault code p0c56 include the Engine Light being ON and the Service Engine Soon Warning Light being illuminated.

The fault code p0c56 can be caused by a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, or a faulty HV control ECU.

  • The fault code P0C56 can be caused by a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, or a faulty HV control ECU.

To fix the automobile fault code p0c56, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c56, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0C56 diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0C56 fault code refers to an issue with the Drive Motor ‘B’ Position Sensor Circuit ‘A’ RangePerformance. This code indicates a problem with the sensor that detects the position of the magnetic poles in the motor resolver. The resolver is crucial for efficient control of the MG1 and MG2 in the vehicle. The resolver consists of a stator with an excitation coil and two detection coils.

As the rotor turns, the gap between the stator and the rotor changes due to the rotor’s oval shape. The detection coils output alternating currents based on the rotor’s position. The HV control ECU uses the phases of the detection coils and the waveform height to determine the absolute position of the rotor. In addition to detecting the rotor’s position, the resolver can also be used as a speed sensor.

The HV control ECU calculates the amount of change in the position within a specific time frame.

However, if the P0C56 fault code is triggered, it means there is an issue with the Drive Motor ‘B’ Position Sensor Circuit ‘A’ RangePerformance, which requires attention and repair.

What are the possible causes for the automobile fault code p0c56?

If you see the engine light or service engine soon warning light on, the fault code P0C56 could be the culprit. This code is often caused by a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, or a faulty HV control ECU. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes mentioned above. Then, visually inspect the wiring harness and connectors related to the Hybrid vehicle motor. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues and guide you towards the appropriate fix.

What should I look for when checking for damaged components or corroded connector pins?

When checking for damaged components or corroded connector pins, start by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause the Engine Light or Service Engine Soon Warning Light to turn on. If you find any damaged components or corroded pins, it’s important to address them promptly to prevent further issues.

p0c56 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid vehicle motor or issues with the motor harness or circuit. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Don’t forget to examine the connector’s pins too.

Scroll to Top