The OBD code B1287 indicates a fault in the audio system amplifier circuit.
Symptoms include the Engine Light being ON.
This issue is commonly caused by a faulty amplifier, open/shorted amplifier harness, poor electrical connections, or a faulty radio unit.
It is not a critical problem.
To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b1287 OBD Code
The vehicle displays an air mix door driver circuit failure (B1287).
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the audio control module.
- Intermittent or constant chime sound while driving.
- Difficulty adjusting audio settings.
Causes of the b1287 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B1287 include issues with the seat track position sensor.
- B1287 can be caused by a faulty amplifier.
- An open or shorted amplifier harness.
- Poor electrical connection in the amplifier circuit.
- A faulty radio unit.
Fixing Error Code b1287 Step By Step
To address fault code B1287, inspect and repair the sunroof switch circuit for any faults.
- To fix OBDII code B1287, review the possible causes related to the code.
- Visually examine the wiring harness and connectors associated with the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify if the code returns.
- If the code returns, further diagnosis may be necessary to pinpoint the exact cause of the issue.
Cost Of Fixing b1287 Fault Code
Diagnosing and repairing fault code B1287 may involve inspecting and potentially replacing a faulty seatbelt pretensioner.
The cost to diagnose and fix OBD code B1287 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b1287 OBD Code
B1287 indicates a fault in the wiper rear park sense input circuit.
OBD code B1287 means Servo Motor Potentiometer Right Circuit Failure.
This code is triggered by an issue with the servo motor potentiometer on the right side of the vehicle.
The servo motor potentiometer is part of the HVAC (Heating, Ventilation, and Air Conditioning) system and is responsible for controlling the position of the blend door or mode door.
When this component fails or malfunctions, it can result in improper air distribution or temperature control inside the vehicle.
Mechanic’s Tech Notes
Code B1287 indicates a low battery voltage condition in the audio control module.
OBDII code B1287 indicates a problem with the servo motor potentiometer circuit in the HVAC system.
To diagnose, use a voltmeter to check for voltage at the servo motor connector.
Ensure wiring and connectors are intact, looking for damage or corrosion.
Test the servo motor’s resistance with the voltmeter to verify its functionality.
A scan tool can help monitor HVAC data and confirm proper servo motor operation.
If necessary, replace the servo motor or repair any damaged wiring.
Remember to clear the code after repairs are made.
FAQ
OBD code B1287 indicates an issue with the amplifier circuit. Check for faults in the amplifier, harness, or radio unit. Inspect wiring and connectors for damage or corrosion.
Common symptoms of OBD code B1287 include Engine Light ON, caused by issues like faulty amplifier, open/shorted harness, poor connections. Inspect and repair affected components and wiring.
Diagnose OBD code B1287 by checking for a faulty amplifier, open/shorted harness, poor electrical connection, or faulty radio unit. Inspect wiring and connectors for damage.
Wrap Up
If your vehicle is displaying OBD code b1287, you may experience issues with the right rear turn signal circuit.
This could be caused by a faulty right rear turn signal bulb, a damaged wiring harness, or a poor connection at the right rear turn signal socket.
To address OBD code b1287, start by inspecting the right rear turn signal bulb for any signs of damage or burnout.
Next, check the wiring harness for any visible wear or breaks.
Ensure the connection at the right rear turn signal socket is secure and free of corrosion.
Replace any faulty components as needed to resolve
