[SOLVED] P2255 Code: Fixing Low Current In Bank 2 Sensor 1

The P2255 fault code in automobiles indicates a problem with the front oxygen sensor in bank 2.

The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this issue could be a faulty front oxygen sensor in bank 2, an open or shorted harness, or a poor electrical connection in the circuit.

It is important to address this issue promptly as it can lead to decreased fuel efficiency and increased emissions. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the possible causes listed above.

Repair Importance Level6.67 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2255 fault code. Here are the symptoms to look out for:

  • The P2255 fault code in an automobile can cause the following symptoms: the engine light will turn on, or the service engine soon warning light will turn on.
  • These lights indicate that there is a problem with the engine.
  • Other symptoms may include reduced engine power, poor acceleration, rough idling, stalling, and decreased fuel efficiency.
  • It is important to address these symptoms as soon as possible to prevent further damage to the vehicle.

There are several causes of the automobile fault code p2255, including a faulty front oxygen sensor and poor electrical connection.

  • The automobile fault code P2255 can be caused by a faulty front oxygen sensor in bank 2.
  • It can also be caused by an open or shorted harness in the front oxygen sensor bank 2.
  • Additionally, a poor electrical connection in the front oxygen sensor bank 2 circuit can also trigger this fault code.

To fix the p2255 fault code, check the possible causes and inspect the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p2255, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2255 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of fixing the P2255 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2255 code refers to the O2 Sensor Negative Current Control Circuit Low Bank 2 Sensor 1.

This sensor is located in the exhaust manifold and detects the amount of oxygen in the exhaust gas compared to the outside air.

The heated oxygen sensor 1 generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The signal is sent to the Engine Control Module (ECM) which adjusts the injection pulse duration to achieve the ideal air-fuel ratio.

The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

What are the possible causes of the P2255 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P2255 fault code. This code is caused by a faulty front oxygen sensor bank 2, an open or shorted front oxygen sensor bank 2 harness, or a poor electrical connection in the front oxygen sensor bank 2 circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Front Oxygen Sensor Bank 2?

If you’re experiencing an Engine Light ON (or Service Engine Soon Warning Light) due to a faulty Front Oxygen Sensor Bank 2, you can visually inspect the related wiring harness and connectors to fix the issue. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the Front Oxygen Sensor Bank 2 harness is open or shorted, or if there is a poor electrical connection in the Front Oxygen Sensor Bank 2 circuit.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the P2255 fault code?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the P2255 fault code, you should replace or repair them as necessary. This will ensure that the Front Oxygen Sensor Bank 2 is receiving the proper electrical connection and prevent any further issues with the engine light or service engine soon warning light. Be sure to visually inspect the related wiring harness and connectors to ensure that everything is in good condition.

p2255 error fault code explained

If your engine light is on and showing the P2255 code, it could be due to a faulty front oxygen sensor bank 2, an open or shorted harness, or poor electrical connection. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top