The automobile fault code P1122 indicates a problem with the Electric Throttle Control Actuator. This can be identified by the Engine Light or Service Engine Soon Warning Light turning on.
The cause of this fault code can be a faulty actuator, an open or shorted harness, or a poor electrical connection in the actuator circuit.
To fix this issue, it is important to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0. It is crucial to address this problem promptly to ensure the proper functioning of the throttle control system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P1122 Fault Code Symptoms: Unveiling The Telltale Signs Of Trouble
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1122 fault code.
- The symptoms of the automobile fault code P1122 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1122?
The automobile fault code p1122 can be caused by a faulty electric throttle control actuator, an open or shorted actuator harness, or a poor electrical connection in the actuator circuit.
- The fault code P1122 can be caused by the following: a faulty Electric Throttle Control Actuator, an open or shorted Electric Throttle Control Actuator harness, and a poor electrical connection in the Electric Throttle Control Actuator circuit.
Fixing Code P1122: Simple Steps To Solve The Issue
To fix the p1122 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1122, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded pins in the connectors.
- This fix should take approximately 1.0 hour.
Cracking The Code: P1122 Fixing Cost And Complexity Unveiled!
The automobile fault code P1122 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
Most auto repair shops typically charge between $75 and $150 per hour for their services.
P1122 Fault Code: Understanding The Causes And Solutions
The P1122 fault code refers to a problem with the Throttle Position Sensor (TPS) circuit.
The TPS is responsible for detecting the position and speed of the throttle valve in the Electric Throttle Control Actuator. It sends voltage signals to the Engine Control Module (ECM) to determine the current opening angle of the throttle valve. When the ECM receives intermittent low voltage signals from the TPS circuit, it triggers the P1122 fault code.
This means that there is a problem with the TPS circuit, causing the voltage signals to drop below the expected range. To fix this issue, the TPS circuit needs to be inspected and repaired. This may involve checking the wiring connections, testing the TPS for proper functionality, and replacing any faulty components.
It is important to address this fault code promptly to ensure proper throttle control and optimal engine performance.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1122 could be the culprit. This code is often caused by a faulty electric throttle control actuator, an open or shorted actuator harness, or a poor electrical connection in the actuator circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded pins in the connectors.
If you’re dealing with the P1122 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Electric Throttle Control Actuator or issues with the wiring harness and connectors. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t delay, check these possible causes and get your engine back in top shape.
When resolving the P1122 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Electric Throttle Control Actuator or its circuit connections. This step is crucial in fixing the problem and getting the engine light or service engine soon warning light to turn off.
Wrap Up
If your engine light is on, it could be due to a faulty Electric Throttle Control Actuator or issues with the wiring harness and connectors.
To fix this, visually inspect the wiring and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors.
