[SOLVED] U2624 Code: How To Fix Lost Communication With Hybrid Battery

The automobile fault code U2624 indicates a problem with the HybridEV Battery Interface Control Module 12 or the Battery Energy Control Module.

The symptom is an illuminated Engine Light or Service Engine Soon Warning Light. The cause could be a faulty module, an open or shorted harness, or a poor electrical connection.

The importance of repairing this issue lies in the fact that it affects the performance of the hybrid or electric vehicle. The repair difficulty is moderate, with a repair time of 1.0.

To fix the problem, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Unveiling U2624: Common Symptoms You Shouldn’t Ignore

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u2624 fault code. Here are the symptoms to look out for:

• The automobile fault code U2624 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

Decoding U2624: Common Causes Of The Fault Code

The automobile fault code u2624 can be caused by a range of issues, including a faulty HybridEV Battery Interface Control Module 12 and poor electrical connections.

• The automobile fault code U2624 can be caused by a faulty Hybrid/EV Battery Interface Control Module 12.
• It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module 12 harness.
• Another cause can be a poor electrical connection in the Hybrid/EV Battery Interface Control Module 12 circuit.
• Lastly, a faulty Battery Energy Control Module can also trigger this fault code.

Fix U2624: Quick Steps To Solve The Issue

To fix the u2624 automobile fault code, check the possible causes and inspect the related wiring harness, connectors, and components for damage.

• To fix the automobile fault code u2624, first, check the possible causes listed above.
• Then, visually inspect the related wiring harness and connectors.
• Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
• This fix will take an estimated repair time of 1.0 hour.

Crunching The Numbers: U2624 Repair Cost & Complexity

The fault code U2624 is a common issue in automobiles that can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of fixing this fault code can vary depending on the auto repair shop, with most charging between $75 and $150 per hour. Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the availability of replacement parts.

It is important to address this fault code promptly to avoid further damage to the vehicle and potential safety hazards.

Decoding U2624: Understanding The Cause Of Abs Pump Motor Circuit Failure

The U2624 fault code indicates a communication problem between the Battery Energy Control Module and the HybridEV Battery Interface Control Module 1.

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation.

The scan tool cannot communicate with the HybridEV Battery Interface Control Modules 12 on Battery Energy Control Module dedicated bus. The DTC will set when there is no temperature report message from HybridEV Battery Interface Control Modules 12 to Battery Energy Control Module within 4s.

FAQ

Wrap Up

If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module 12 or a poor electrical connection.

To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.

Resources

• Resource 1
• Resource 2
• Resource 3
• Resource 4