The automobile fault code U2623 indicates a problem with the HybridEV Battery Interface Control Module 11 or the Battery Energy Control Module.
The symptom is an illuminated Engine Light or Service Engine Soon Warning Light. The cause could be a faulty module, an open or shorted harness, or poor electrical connection. The importance of repairing this issue is crucial as it affects the performance of the vehicle.
The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors for any damage or corrosion. The repair time is estimated to be around 1.0 hour. To interpret the fault code, one needs to check the possible causes listed above and inspect the related components.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Accelerator: U2623 Symptoms Explained
If you notice the Engine Light ON, it could be a sign of u2623 fault code. Here are the symptoms to look out for:
- The automobile fault code U2623 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U2623: Common Causes Of The Fault Code
The automobile fault code u2623 can be caused by various factors, including a faulty battery control module and poor electrical connections.
- The automobile fault code U2623 can be caused by a faulty Hybrid/EV Battery Interface Control Module 11.
- It can also be caused by an open or shorted Hybrid/EV Battery Interface Control Module 11 harness.
- Another cause can be a poor electrical connection in the Hybrid/EV Battery Interface Control Module 11 circuit.
- Lastly, a faulty Battery Energy Control Module can also cause this fault code.
Fix U2623: Simple Steps To Get Your Car Running Again
To fix the u2623 automobile fault code, check the possible causes and inspect the wiring harness, connectors, and components for damage.
- To fix the automobile fault code u2623, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U2623 Repair Cost & Complexity
The fault code U2623 is a common issue in automobiles.
The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this fault code is dependent on the repair time.
Most auto repair shops charge between $75 and $150 per hour.
Therefore, the cost of fixing the U2623 fault code can range from $75 to $150.
The repair time is the most influential factor in determining the cost of fixing this fault code.
Unlocking The Mystery Of U2623 Fault Code
The u2623 fault code indicates a communication problem between the Battery Energy Control Module and the HybridEV Battery Interface Control Module 11. Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation.
The scan tool cannot communicate with the HybridEV Battery Interface Control Modules 11 on Battery Energy Control Module dedicated bus.
The DTC will set when there is no temperature report message from HybridEV Battery Interface Control Modules 11 to Battery Energy Control Module within 4s.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u2623 automobile fault code. This code is caused by a faulty Hybrid/EV Battery Interface Control Module 11, an open or shorted Hybrid/EV Battery Interface Control Module 11 harness, a poor electrical connection in the Hybrid/EV Battery Interface Control Module 11 circuit, or a faulty Battery Energy Control Module. To fix this issue, you should check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.
If the engine light is on due to a faulty Hybrid/EV Battery Interface Control Module 11, the harness can be checked for faults by visually inspecting the related wiring harness and connectors. Look for broken, bent, pushed out, or corroded connector’s pins. Check for damaged components and ensure that the Hybrid/EV Battery Interface Control Module 11 harness is not open or shorted. Additionally, check for poor electrical connections in the Hybrid/EV Battery Interface Control Module 11 circuit and the Battery Energy Control Module.
If you’re experiencing the u2623 automobile fault code, you may notice that your engine light is on. This could be due to a faulty Hybrid/EV Battery Interface Control Module 11, an open or shorted harness, a poor electrical connection in the circuit, or a faulty Battery Energy Control Module. To fix the issue, start by visually inspecting the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.
Wrap Up
If your engine light is on, it could be due to a faulty HybridEV Battery Interface Control Module 11 or a poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.