[SOLVED] U216B Code: Fixing Lost Communication With Rear Object Detection

The automobile fault code U216B indicates a problem with the Rear Object Detection Control Module, which can trigger the Engine Light ON or Service Engine Soon Warning Light.

The possible causes of this fault code include a faulty Rear Object Detection Control Module, an open or shorted harness, or poor electrical connection. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be 1.0.

It is important to interpret the fault code correctly to ensure timely and effective repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u216b fault code.

Symptoms include:

  • The fault code U216B is associated with several symptoms, including the illumination of the engine light or service engine soon warning light.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or slipping gears.
  • Additionally, the vehicle may experience a decrease in fuel efficiency or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe operation on the road.

The automobile fault code u216b can be caused by a faulty control module, open or shorted harness, or poor electrical connection.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

  • The automobile fault code U216B can be caused by a faulty Rear Object Detection Control Module.
  • It can also be caused by an open or shorted Rear Object Detection Control Module harness.
  • Additionally, a poor electrical connection in the Rear Object Detection Control Module circuit can also trigger this fault code.

To fix the automobile fault code u216b, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code u216b, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The factors that influence the cost of diagnosing and fixing the automobile fault code U216B based on the repair time are: – Estimated repair time is 1.0 hour. – Auto repair shops usually charge between $75 and $150 per hour. – The complexity of the repair required to fix the fault code. – The availability and cost of replacement parts. – The experience and expertise of the mechanic performing the repair. – The location of the auto repair shop, as labor rates can vary by region.

The u216b fault code is related to the serial data circuits in a vehicle. Devices in the vehicle monitor for serial data communications during normal operation. The code sets when a supervised periodic message that includes the transmitter device availability has not been received.

This code specifically indicates a loss of communication with the Rear Object Detection Control Module.

What are the possible causes of the engine light being on with the fault code u216b?

If the engine light is on with the fault code u216b, it could be due to a faulty Rear Object Detection Control Module, an open or shorted harness, or a poor electrical connection in the module circuit. To fix this issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the issue related to the Rear Object Detection Control Module with the fault code u216b?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to a faulty Rear Object Detection Control Module. Check for an open or shorted harness, poor electrical connection, or damaged components. Visually inspect the wiring harness and connectors for any broken, bent, pushed out, or corroded pins.

What steps should be taken to visually inspect the wiring harness and connectors related to the Rear Object Detection Control Module with the fault code u216b?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light with the fault code u216b, it could be due to a faulty Rear Object Detection Control Module, an open or shorted harness, or poor electrical connection. To fix this issue, visually inspect the related wiring harness and connectors for any damaged components, broken, bent, pushed out, or corroded connector’s pins. Check the “Possible Causes” listed above for further guidance.

u216b error fault code explained

If your engine light is on, it could be due to a faulty Rear Object Detection Control Module or issues with its wiring. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins. Take action accordingly.

Scroll to Top