The automobile fault code U2167 indicates a problem with the Remote Control Door Lock Receiver (RCDLR) in your vehicle.
The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this issue could be a faulty RCDLR, an open or shorted RCDLR harness, or a poor electrical connection in the RCDLR circuit. It is important to address this issue promptly as it can affect the functionality of your vehicle’s remote control door lock system.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and visually inspect the related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Brake Lights: U2167 Fault Code Symptoms
If you see the Engine Light ON, it could be due to the u2167 fault code. Here are the symptoms to look out for:
- The automobile fault code U2167 has the following symptoms: Engine Light ON (or Service Engine Soon Warning Light).
Decoding U2167: Common Causes Of The Fault Code
The automobile fault code u2167 can be caused by a faulty RCDLR, open or shorted harness, or poor electrical connection.
- The automobile fault code U2167 can be caused by a faulty Remote Control Door Lock Receiver (RCDLR).
- It can also be caused by an open or shorted Remote Control Door Lock Receiver harness.
- Additionally, a poor electrical connection in the Remote Control Door Lock Receiver circuit can also trigger this fault code.
Fix U2167: Simple Steps To Get Your Car Running Again
Below are some possible fixes for the automobile fault code u2167, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code U2167, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U2167 Repair Cost & Complexity
The automobile fault code U2167 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services.
Therefore, the fixing cost of U2167 will be between $75 and $150, depending on the repair time required.
U2167: Your Car’s Communication Breakdown Explained
The u2167 fault code indicates a loss of serial data communications between devices in the vehicle.
This code specifically refers to a loss of communication with the remote control door lock receiver.
The code does not necessarily mean that the devices containing the stored code have failed, but rather that a supervised periodic message has not been received.
If this fault code appears, it is important to have the vehicle inspected and repaired by a qualified technician to ensure proper functioning of the remote control door lock receiver.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u2167 fault code. This code is usually caused by a faulty Remote Control Door Lock Receiver (RCDLR), an open or shorted RCDLR harness, or a poor electrical connection in the RCDLR circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the U2167 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. The possible causes include a faulty Remote Control Door Lock Receiver (RCDLR), an open or shorted RCDLR harness, or a poor electrical connection in the RCDLR circuit. To address these issues, you should visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the u2167 fault code can lead to serious consequences such as reduced fuel efficiency, engine misfires, and even engine damage. The fault code is caused by a faulty Remote Control Door Lock Receiver (RCDLR), an open or shorted harness, or poor electrical connection. To fix the issue, one must visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty Remote Control Door Lock Receiver (RCDLR), an open or shorted harness, or poor electrical connection.
Check for damaged components and inspect the wiring harness and connectors for any issues.
