The automobile fault code U2111 indicates a problem with the Steering Control System Module. The most common symptom is the Engine Light ON or Service Engine Soon Warning Light.
The cause of this fault code could be a faulty Steering Control System Module, an open or shorted harness, or a poor electrical connection.
It is important to address this issue promptly as it can affect the steering control of the vehicle. The repair time for this issue is estimated to be around 1.0 hour.
To fix this problem, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Decode U2111: Uncovering Symptoms Of Faulty Vehicle Communication
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u2111 fault code.
Here are the symptoms to look out for:
- The automobile fault code U2111 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light, loss of communication with the ABS module, loss of communication with the transmission control module, and loss of communication with the body control module.
Decoding U2111: Common Causes Of The Fault Code
The automobile fault code u2111 can be caused by various factors, including a faulty steering control system module and poor electrical connections.
- The automobile fault code u2111 can be caused by a faulty Steering Control System Module.
- It can also be caused by an open or shorted Steering Control System Module harness.
- Additionally, a poor electrical connection in the Steering Control System Module circuit can also trigger this fault code.
Fix U2111: Simple Steps To Solve The Issue
Below are some possible fixes for the automobile fault code u2111, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u2111, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U2111 Repair Cost & Complexity
The automobile fault code U2111 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of U2111 will range between $75 and $150, depending on the repair time required.
These factors should be considered when estimating the cost of fixing the U2111 fault code.
Decoding U2111: Understanding The Lost Communication With Steering Angle Sensor
The U2111 fault code indicates a loss of communication with the steering control system. Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation.
The fault code sets when a supervised periodic message that includes the transmitter device availability has not been received.
It does not represent a failure of the devices that contain the stored code.
FAQ
If your engine light is on and you’re seeing the u2111 fault code, it could be due to a faulty Steering Control System Module, an open or shorted harness, or poor electrical connection in the module circuit. To fix the issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u2111 fault code, which indicates a faulty Steering Control System Module, you can fix it by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the Steering Control System Module harness is open or shorted, or if the circuit has a poor electrical connection.
If you encounter the u2111 fault code, which causes the engine light to turn on, you should check the Steering Control System Module for faults. To fix this issue, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any open or shorted circuits and poor electrical connections.

Wrap Up
If your engine light is on, it could be due to a faulty Steering Control System Module or issues with the module’s wiring harness or electrical connection.
To fix the problem, visually inspect the wiring and connectors for damage and check for broken or corroded pins.