If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the automobile fault code: u1713.
This code is typically caused by a faulty Drive Power Window SensorMotor, an open or shorted Drive Power Window SensorMotor harness, a poor electrical connection in the Drive Power Window SensorMotor circuit, or a faulty Driver Door Module (DDM). The importance of repairing this issue lies in the fact that it can affect the overall performance of your vehicle. The repair difficulty is moderate, with a repair time of 1.0.
To fix the issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Uncovering U1713: Common Symptoms Of This Fault Code
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1713 fault code. Here are the symptoms to look out for:
- The automobile fault code U1713 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U1713: Common Causes Of The Fault Code
The automobile fault code u1713 can be caused by a range of issues, including faulty sensors, poor electrical connections, and malfunctioning modules.
- The automobile fault code U1713 can be caused by a faulty Drive Power Window Sensor/Motor.
- It can also be caused by an open or shorted Drive Power Window Sensor/Motor harness.
- Another cause can be a poor electrical connection in the Drive Power Window Sensor/Motor circuit.
- Lastly, a faulty Driver Door Module (DDM) can also trigger the U1713 fault code.
Fix U1713: Simple Steps To Solve The Fault Code
Below are some possible fixes for the automobile fault code u1713, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1713, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1713 Repair Cost & Complexity
The automobile fault code U1713 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the U1713 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
U1713: Unveiling The Mystery Behind Your Car’s Communication Failure
The U1713 code is related to the power window high-speed serial data circuit voltage. It is monitored and controlled by the front door modules and window sensors.
Each front door window motor has a window sensor mounted to it. The door modules and sensors communicate with each other via a power window high-speed serial data circuit and a power window low-speed serial data circuit. The DTC will be set by the DDM or PFDM when the power window high-speed serial data circuit voltage is a constant low for 112 milliseconds while the window is not moving or the power window high-speed serial data circuit 1 kHz signal is active for a period of 112 milliseconds while the window is not moving.
FAQ
If you’re experiencing the u1713 automobile fault code, you may notice that your engine light is on or that the service engine soon warning light is illuminated. This issue can be caused by a faulty drive power window sensor/motor, an open or shorted sensor/motor harness, a poor electrical connection in the sensor/motor circuit, or a faulty driver door module (DDM). To fix this issue, it’s important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1713 fault code, which is indicated by the engine light being on or the service engine soon warning light, there are a few things you can do to fix it. The possible causes include a faulty drive power window sensor/motor, an open or shorted harness, poor electrical connection in the circuit, or a faulty driver door module (DDM). To address these issues, you should visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
A faulty Driver Door Module (DDM) is listed as one of the possible causes of the u1713 fault code, which triggers the Engine Light ON or Service Engine Soon Warning Light. To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a u1713 fault code, check for a faulty drive power window sensormotor, open or shorted harness, poor electrical connection, or a faulty driver door module. Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded pins.
