[SOLVED] U1548 Code: Fixing Left Rear Window Switch Communication Error

The automobile fault code U1548 indicates a problem with the left rear window switch or its circuitry.

The most common symptom is the illumination of the engine light or service engine soon warning light.

The cause could be a faulty left rear window switch, an open or shorted harness, a poor electrical connection, or a faulty body control module.

The importance of repairing this issue lies in the fact that it can affect the overall functionality of the vehicle. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.

The repair time is estimated to be around 1.0 hour. To interpret the fault code, one needs to check the possible causes listed above and visually inspect the related wiring harness and connectors.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1548 fault code. Here are the symptoms to look out for:

  • The U1548 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
  • The vehicle may also experience a decrease in power or acceleration, and the engine may stall or hesitate during operation.
  • Additionally, the vehicle’s fuel efficiency may decrease, and there may be issues with the vehicle’s speedometer or other gauges.

The automobile fault code u1548 can be caused by a faulty left rear window switch, open or shorted harness, poor electrical connection, or a faulty body control module (BCM).

  • The automobile fault code U1548 can be caused by a faulty left rear window switch.
  • It can also be caused by an open or shorted left rear window switch harness.
  • Another possible cause is a poor electrical connection in the left rear window switch circuit.
  • Lastly, a faulty body control module (BCM) can also trigger this fault code.

To fix the automobile fault code u1548, check the possible causes and inspect the related wiring harness, connectors, and components for damage.

  • To fix the automobile fault code u1548, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U1548 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the U1548 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U1548 code is related to the Local Interconnect Network (LIN) Bus. It occurs when the Body Control Module (BCM) loses communication with the Left Rear Window Switch on the LIN Bus. The LIN Bus is a single wire with a transmission rate of 10.417 Kbits that transmits serial data between a master control module and other LIN devices within a subsystem.

If serial data communication is lost between any of the LIN devices on the LIN bus network, the master control module will set a no communication code against the non-communicating LIN device.

The U1548 code is set when a supervised periodic message to the BCM from the Left Rear Window Switch has not been received.

What are the possible causes of the u1548 automobile fault code?

If you’re experiencing the u1548 automobile fault code, your engine light may be on. This could be due to a faulty left rear window switch, an open or shorted switch harness, a poor electrical connection in the switch circuit, or a faulty body control module (BCM). To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the related wiring harness and connectors to fix the u1548 fault code?

If you’re experiencing the u1548 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. First, check the Possible Causes listed above, which include a faulty Left Rear Window Switch, an open or shorted Left Rear Window Switch harness, a poor electrical connection in the Left Rear Window Switch circuit, or a faulty Body Control Module (BCM). To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

Is a faulty Body Control Module (BCM) a common cause of the u1548 fault code?

The u1548 fault code can be caused by a faulty Left Rear Window Switch, an open or shorted harness, a poor electrical connection in the switch circuit, or a faulty Body Control Module (BCM). While a faulty BCM is listed as a possible cause, it is not a common one. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

u1548 error fault code explained

If your engine light is on, it could be due to a faulty left rear window switch, open or shorted harness, poor electrical connection, or a faulty body control module.

Check for these possible causes by visually inspecting the wiring harness and connectors for damage or corrosion.

Scroll to Top