The automobile fault code U147E indicates a problem with the Left Blind Spot Sensor (LBSS) in your vehicle.
The most common symptom is the Engine Light ON or Service Engine Soon Warning Light.
The cause of this fault code could be a faulty LBSS, an open or shorted LBSS harness, or a poor electrical connection in the LBSS circuit. It is important to address this issue promptly as it can affect the safety features of your vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
The repair time for this fault code is estimated to be 1.0 hour. It is crucial to interpret the fault code correctly to ensure the proper repair is performed.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decoding U147E: Common Symptoms Of This Fault Code
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u147e fault code.
Here are the symptoms to look out for:
- The U147E fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
- The vehicle may also experience reduced power or acceleration, and the engine may stall or hesitate during operation.
- Additionally, the vehicle’s fuel efficiency may decrease, and there may be a noticeable decrease in overall performance.
Decoding U147E: Common Causes Of The Fault Code
The automobile fault code u147e can be caused by a faulty LBSS, open or shorted LBSS harness, or poor electrical connection in the LBSS circuit.
- The automobile fault code U147E can be caused by a faulty Left Blind Spot Sensor (LBSS).
- It can also be caused by an open or shorted Left Blind Spot Sensor harness.
- Additionally, a poor electrical connection in the Left Blind Spot Sensor circuit can also trigger this fault code.
Fix U147E: Simple Steps To Solve The Issue
Below are some possible fixes for the automobile fault code u147e, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u147e, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U147E Diagnosis Cost & Complexity
The automobile fault code U147E has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services.
Therefore, the fixing cost of U147E will range between $75 and $150, depending on the repair time required. It is important to consider the repair time when estimating the fixing cost of this fault code.
U147E: The Low Tire Pressure Monitoring System Fault
The U147E fault code is related to the Blind Spot Monitor (BSM) system in automobiles.
The BSM system has two primary components, the Left Blind Spot Sensor (LBSS) and Right Blind Spot Sensor (RBSS).
The LBSS includes an internal microprocessor that monitors and controls both the sensor and the blind spot indicator. The microprocessor analyzes the sensor data to determine whether any detected objects should be reported. If incorrect data is received from the LBSS, the U147E Diagnostic Trouble Code (DTC) will set.
FAQ
If your engine light is on and you’re seeing the u147e fault code, it could be due to a faulty left blind spot sensor (LBSS), an open or shorted LBSS harness, or a poor electrical connection in the LBSS circuit. To fix the issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to a faulty Left Blind Spot Sensor (LBSS), an open or shorted LBSS harness, or a poor electrical connection in the LBSS circuit. To fix this issue, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out connector pins and replace any damaged components as necessary.
If you’re experiencing the u147e fault code, you may notice that your engine light is on. This could be due to a faulty Left Blind Spot Sensor (LBSS), an open or shorted LBSS harness, or a poor electrical connection in the LBSS circuit. To troubleshoot this issue, visually inspect the wiring harness and connectors related to the LBSS. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Be sure to check the “Possible Causes” listed above for further guidance.
Wrap Up
If your engine light is on, it could be due to a faulty left blind spot sensor (LBSS), an open or shorted LBSS harness, or a poor electrical connection in the LBSS circuit.
To fix the issue, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
