The automobile fault code U1464 indicates a problem with the Electronic Power Steering Module (EPSM) or its related components. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.
The cause of this fault code could be a faulty EPSM, an open or shorted EPSM harness, poor electrical connection in the EPSM circuit, or a faulty Body Control Module (BCM).
The importance of repairing this issue lies in the fact that it affects the power steering system, which could lead to difficulty in steering the vehicle. The repair difficulty is moderate, and the repair time is estimated at 1.0 hour. To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Steering? U1464 Could Be The Culprit
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u1464 fault code.
Here are the symptoms to look out for:
- The automobile fault code U1464 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U1464: Common Causes Of The Fault Code
The automobile fault code u1464 can be caused by a faulty EPSM, open or shorted EPSM harness, poor electrical connection in EPSM circuit, or a faulty BCM.
- The automobile fault code U1464 can be caused by a faulty Electronic Power Steering Module (EPSM).
- It can also be caused by an open or shorted Electronic Power Steering Module harness.
- Another possible cause is a poor electrical connection in the Electronic Power Steering Module circuit.
- Lastly, a faulty Body Control Module (BCM) can also trigger the U1464 fault code.
Fix U1464: Simple Steps To Solve The Issue
Below are some possible fixes for the automobile fault code u1464, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1464, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1464 Repair Cost & Complexity
The automobile fault code U1464 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U1464 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
Unlocking The Mystery Of U1464: Your Car’s Communication Breakdown
The U1464 fault code is related to the Electronic Power Steering Module (EPSM) in a vehicle. This code is triggered when the EPSM receives incorrect steering torque data. The Diagnostic Trouble Code (DTC) will be set when this happens, indicating an issue with the steering system.
The code is specifically labeled as “Implausible Data Received From Electronic Power Steering Steering Torqu.” If this fault code is detected, it is important to have the steering system checked and repaired as soon as possible to ensure safe driving conditions.
FAQ
If you’re experiencing the u1464 fault code, your engine light may be on. This could be due to a faulty Electronic Power Steering Module (EPSM), an open or shorted EPSM harness, a poor electrical connection in the EPSM circuit, or a faulty Body Control Module (BCM). To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u1464 fault code, your engine light may be on. This could be due to a faulty Electronic Power Steering Module (EPSM), an open or shorted EPSM harness, a poor electrical connection in the EPSM circuit, or a faulty Body Control Module (BCM). To fix the issue, visually inspect the wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u1464 fault code, you may notice that your engine light is on. This could be due to a faulty Electronic Power Steering Module (EPSM), an open or shorted EPSM harness, poor electrical connection in the EPSM circuit, or a faulty Body Control Module (BCM). To diagnose the issue, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on due to the u1464 fault code, check for a faulty Electronic Power Steering Module (EPSM), open or shorted EPSM harness, poor electrical connection in the EPSM circuit, or a faulty Body Control Module (BCM).
Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.