If you see the Engine Light ON or Service Engine Soon Warning Light in your car, it could be due to the automobile fault code: u1288. This code indicates a problem with the Gauge Control Module, which could be faulty or have a poor electrical connection.
Additionally, a faulty Parking and Back-Up Sensor (PARKSR) Control Unit could also be the cause.
It is important to visually inspect the related wiring harness and connectors to check for any damage or corrosion.
The repair time for this fault code is 1.0, and it is crucial to fix the issue to avoid any further damage to your car.
To interpret the fault code, you need to check the possible causes listed above and look for any broken or bent components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U1288: Common Symptoms You Need To Know
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u1288 fault code.
Here are the symptoms to look out for:
- The automobile fault code U1288 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U1288: Common Causes Of The Fault Code
The automobile fault code u1288 can be caused by a faulty gauge control module, open or shorted harness, poor electrical connection, or a faulty PARKSR control unit.
- The automobile fault code U1288 can be caused by a faulty Gauge Control Module.
- It can also be caused by an open or shorted Gauge Control Module harness.
- Another cause can be a poor electrical connection in the Gauge Control Module circuit.
- Lastly, a faulty Parking and Back-Up Sensor (PARKSR) Control Unit can also trigger this fault code.
Fix U1288: Simple Steps To Solve The Issue
To fix the u1288 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code u1288, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1288 Repair Cost & Complexity
The automobile fault code U1288 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.
Therefore, the total cost of diagnosis and fixing the U1288 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
Unlocking The Mystery Of U1288: A Guide To Diagnosis
The U1288 fault code is related to a communication malfunction between the Gauge Control Module and the Parking and Back-Up Sensor Control Unit. This code indicates that there is a lost communication with PARKSR. When this code appears, it means that the vehicle’s system is unable to communicate with the parking and back-up sensor control unit.
This can lead to issues with the vehicle’s parking and back-up sensors, which can affect the driver’s ability to park and maneuver the vehicle safely.
It is important to have this issue diagnosed and repaired as soon as possible to ensure the safety of the driver and passengers.
FAQ
If you’re experiencing the u1288 fault code, your engine light may be on. This could be due to a faulty Gauge Control Module, an open or shorted harness, poor electrical connection in the circuit, or a faulty Parking and Back-Up Sensor Control Unit. To fix the issue, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector pins.
If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to a faulty Gauge Control Module, an open or shorted harness, a poor electrical connection in the circuit, or a faulty Parking and Back-Up Sensor Control Unit. To fix the issue, inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.
A faulty Parking and Back-Up Sensor Control Unit is one of the possible causes of the u1288 automobile fault code. This can trigger the Engine Light ON or Service Engine Soon Warning Light. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Gauge Control Module, open or shorted harness, poor electrical connection, or a faulty Parking and Back-Up Sensor Control Unit.
Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.
