The automobile fault code U1286 indicates a problem with the wireless charger unit or keyless access control unit.
The most common symptom is the engine light turning on.
The cause of this issue could be a faulty wireless charger unit, an open or shorted harness, or a poor electrical connection. To fix this problem, one should visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is estimated to be around 1.0. It is important to address this issue promptly to avoid any further damage to the vehicle. To interpret the fault code, one should consult the vehicle’s manual or seek assistance from a professional mechanic.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Brake Pedal? U1286 Could Be The Culprit
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u1286 fault code. Here are the symptoms to look out for:
- The automobile fault code U1286 can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
- The vehicle may also experience problems with acceleration or deceleration, and the engine may stall or hesitate during operation.
- Additionally, the vehicle’s fuel efficiency may decrease, and there may be a noticeable decrease in power or performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding U1286: Common Causes Of The Fault Code
The automobile fault code u1286 can be caused by a faulty wireless charger unit, open or shorted harness, poor electrical connection, or a faulty keyless access control unit.
- The automobile fault code U1286 can be caused by a faulty wireless charger unit.
- It can also be caused by an open or shorted wireless charger unit harness.
- Another cause of this fault code is a poor electrical connection in the wireless charger unit circuit.
- Lastly, a faulty keyless access control unit can also trigger the U1286 fault code.
Fix U1286: Simple Steps To Get Your Car Running Again
Below are the possible fixes for the automobile fault code u1286, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1286, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1286 Repair Cost & Complexity
The factors that influence the cost of diagnosing and fixing the automobile fault code U1286 based on the estimated repair time of 1.0 hour are: – The hourly rate charged by the auto repair shop, which can range from $75 to $150 per hour. – The complexity of the issue causing the fault code, which can affect the time required for diagnosis and repair. – The availability of the necessary parts and tools, which can impact the speed and cost of the repair. – The experience and expertise of the mechanic performing the repair, which can affect the efficiency and accuracy of the diagnosis and fix.
Decoding U1286: Understanding Your Vehicle’s Brake Switch Circuit Failure
The U1286 fault code is related to a communication malfunction between the Wireless Charger Unit and the Keyless Access Control Unit.
This code indicates that the Wireless Charger Unit has lost communication with the Keyless Access Control Unit. When this fault code appears, it means that the communication between these two units has been disrupted, and the wireless charging function may not work properly. To fix this issue, the communication between the Wireless Charger Unit and the Keyless Access Control Unit needs to be restored.
FAQ
If your engine light is on and you’re seeing the u1286 fault code, it could be due to a faulty wireless charger unit, an open or shorted harness, poor electrical connection in the circuit, or a faulty keyless access control unit. To fix the issue, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for any damaged components or broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u1286 fault code, which indicates a faulty Wireless Charger Unit, there are a few things you can do to fix it. First, check the possible causes listed above, including a faulty Wireless Charger Unit, an open or shorted harness, poor electrical connection, or a faulty Keyless Access Control Unit. Visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.
If you encounter the u1286 fault code, start by checking the possible causes, which include a faulty wireless charger unit, open or shorted harness, poor electrical connection, or a faulty keyless access control unit. To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This step is crucial in identifying the root cause of the problem and finding the appropriate fix.
Wrap Up
If your engine light is on, it could be due to a faulty wireless charger unit, open or shorted harness, poor electrical connection, or a faulty keyless access control unit. Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.
