The automobile fault code U1267 indicates a problem with the Electronic Shift Module (ESM) in your vehicle. The most common symptom of this issue is the Engine Light turning on or the Service Engine Soon Warning Light.
The cause of this fault code could be a faulty ESM, an open or shorted ESM harness, or a poor electrical connection in the ESM circuit. It is important to address this issue promptly as it can affect the performance of your vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
The repair time for this issue is estimated to be around 1.0 hour.
It is crucial to interpret the fault code correctly to ensure the proper repair is made.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Steering? U1267 Could Be The Culprit
If you notice the Engine Light ON, it could be a sign of u1267 fault code. Here are the symptoms to look out for:
- The fault code U1267 in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the vehicle’s transmission, problems with the speedometer or odometer, and difficulty shifting gears.
- Additionally, the vehicle’s ABS system may not function properly, and the traction control system may be disabled.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding U1267: Common Causes
The automobile fault code u1267 can be caused by a faulty ESM, open or shorted ESM harness, or poor electrical connection in the ESM circuit.
- The automobile fault code U1267 can be caused by a faulty Electronic Shift Module (ESM).
- It can also be caused by an open or shorted Electronic Shift Module harness.
- Additionally, a poor electrical connection in the Electronic Shift Module circuit can also trigger this fault code.
Fix U1267: Simple Steps To Get Your Car Running Again
Below are some possible fixes for the automobile fault code u1267.
- To fix the automobile fault code u1267, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1267 Fixing Cost & Complexity
The automobile fault code U1267 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.
Therefore, the total cost of fixing the U1267 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
Unlocking The Mystery Of U1267: A Guide To Diagnosis
The U1267 code is a Transmission Control Module (TCM) fault code.
It occurs when there is a problem with both CAN busses. The TCM cannot receive data from the Electronic Shift Module (ESM) to determine the shifter position. This code sets when there is no valid data from ESM on CAN C or CAN DPT.
In other words, the TCM is unable to communicate with the ESM due to a problem with the CAN circuits.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u1267 fault code. This code is usually caused by a faulty Electronic Shift Module (ESM), an open or shorted ESM harness, or poor electrical connection in the ESM circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1267 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. The cause of this issue could be a faulty Electronic Shift Module (ESM), an open or shorted ESM harness, or a poor electrical connection in the ESM circuit. To address these issues, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Ignoring the u1267 fault code, which indicates a faulty Electronic Shift Module (ESM) or poor electrical connection, can lead to serious consequences. The engine light will remain on, indicating a problem, and the vehicle may experience shifting issues. It is important to fix the issue in a timely manner by visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty Electronic Shift Module (ESM), an open or shorted ESM harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.
Check for broken, bent, or pushed out connector pins.
