The automobile fault code U1248 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a need for service.
The cause of this issue could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is estimated at 1.0, and it is crucial to address the problem promptly to avoid further damage to the vehicle. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and follow the suggested fix.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Brake Pedal? U1248 Could Be The Culprit
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u1248 fault code. Here are the symptoms to look out for:
- The U1248 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the ABS system, problems with the speedometer, and difficulty shifting gears.
- Additionally, the vehicle may experience a loss of power or acceleration, and the brakes may feel spongy or unresponsive.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding U1248: Common Causes Of The Fault Code
The automobile fault code u1248 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.
- The automobile fault code U1248 can be caused by a faulty module that is not communicating.
- It can also be caused by an open or shorted module harness.
- Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
Fix U1248: Simple Steps To Get Your Car Running Again
To fix the u1248 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code u1248, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1248 Repair Cost & Complexity
The automobile fault code U1248 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services.
Therefore, the fixing cost of U1248 will range between $75 and $150, depending on the repair time required.
U1248: Your Car’s Abs System Needs Attention
The U1248 fault code is related to the class 2 serial data circuit in automobiles. Modules in the circuit monitor for serial data communications during normal vehicle operation. If a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1248 DTC is set.
This code indicates that there is invalid or missing data for time or date.
FAQ
If you see the engine light ON or Service Engine Soon Warning Light, it could be due to the u1248 fault code. This code is triggered by a faulty module that is not communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To fix this issue, you need to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1248 automobile fault code, you may notice that your engine light is on. This could be due to a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re trying to fix the u1248 automobile fault code, start by checking for the symptom of an engine light or service engine soon warning light. The cause of this issue could be a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix the problem, visually inspect the related wiring harness and connectors, looking for damaged components and broken, bent, pushed out, or corroded connector pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light due to the u1248 fault code, check for a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection.
Visually inspect the related wiring harness and connectors, and check for damaged components and broken, bent, pushed out, or corroded connector’s pins.
