The automobile fault code U1247 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a potential issue. The cause of this fault code could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit.
It is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and look for broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U1247: Identifying Symptoms Of This Auto Fault Code
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1247 fault code. Here are the symptoms to look out for:
- The fault code U1247 in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the ABS system, problems with the speedometer, and difficulty shifting gears.
- Additionally, the vehicle may experience a loss of power or acceleration, and the brakes may feel spongy or unresponsive.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding U1247: Common Causes
The automobile fault code u1247 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.
- The automobile fault code U1247 can be caused by a faulty module that is not communicating.
- It can also be caused by an open or shorted module harness.
- Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
Fix U1247: Simple Steps To Solve The Issue
To fix the u1247 automobile fault code, check the possible causes and inspect the wiring harness, connectors, and components for damage.
- To fix the automobile fault code u1247, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1247 Repair Cost & Complexity
The automobile fault code U1247 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
Therefore, the total cost of diagnosing and fixing the U1247 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
U1247: Your Car’s Abs System Needs Attention
The U1247 code is related to the class 2 serial data circuit in automobiles. Modules monitor serial data communications during normal vehicle operation.
If a module does not associate an identification number with at least one critical parameter within 5 seconds, the U1247 code is set.
This code indicates that there is invalid or missing data for Primary I.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u1247 automobile fault code. This code is caused by a faulty module that is not communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the U1247 fault code, which is indicated by the engine light being on, you may have a faulty module that isn’t communicating properly. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify if the module harness is open or shorted, or if there’s a poor electrical connection in the module circuit.
Ignoring the u1247 fault code can lead to serious consequences such as reduced engine performance, increased fuel consumption, and potential damage to other engine components. The fault code indicates a faulty module that is not communicating, an open or shorted module harness, or poor electrical connection. To fix the issue, it is important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light due to the U1247 fault code, check for a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection. Visually inspect the related wiring harness and connectors, and check for damaged components and broken, bent, pushed out, or corroded connector’s pins.
