The automobile fault code U1244 indicates a problem with the GPS antenna circuit, which can cause the engine light to turn on. The most common causes of this fault code are a faulty GPS antenna, an open or shorted GPS antenna harness, or a poor electrical connection in the GPS antenna circuit.
To fix this issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0.
It is important to address this issue promptly to avoid further damage to the vehicle’s systems.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U1244: Identifying Symptoms Of This Fault Code
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1244 fault code. Here are the symptoms to look out for:
- The U1244 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
- The vehicle may also experience problems with acceleration or deceleration, and the engine may stall or hesitate during operation.
- Additionally, the vehicle’s fuel efficiency may decrease, and there may be a noticeable decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding U1244: Common Causes Of The Fault Code
The automobile fault code u1244 can be caused by a faulty GPS antenna, open or shorted GPS antenna harness, or poor electrical connection in the GPS antenna circuit.
- The automobile fault code U1244 can be caused by a faulty GPS antenna.
- It can also be caused by an open or shorted GPS antenna harness.
- Additionally, a poor electrical connection in the GPS antenna circuit can also trigger this fault code.
Fix U1244: Simple Steps To Solve The Issue
To fix the u1244 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code u1244, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1244 Repair Cost & Complexity
The automobile fault code U1244 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U1244 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
U1244: Understanding The Mysterious Brake Pressure Sensor Circuit Failure
The U1244 code is related to the GPS antenna in the automobile. This code is triggered when there is an open or short to ground in the GPS antenna connection.
The Diagnostic Trouble Code (DTC) is set when this issue is detected.
It is important to address this issue as it can affect the accuracy of the GPS system in the vehicle. A professional mechanic should be consulted to diagnose and fix the problem.
FAQ
If your engine light is on and you’re seeing the u1244 fault code, it could be due to a faulty GPS antenna, an open or shorted GPS antenna harness, or a poor electrical connection in the GPS antenna circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Check for any damaged components and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u1244 fault code, your engine light may be on. This could be due to a faulty GPS antenna, an open or shorted GPS antenna harness, or a poor electrical connection in the GPS antenna circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Check for any damaged components and look for broken, bent, pushed out, or corroded connector pins.
If you’re troubleshooting the u1244 automobile fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The cause of this issue could be a faulty GPS Antenna, an open or shorted GPS Antenna harness, or a poor electrical connection in the GPS Antenna circuit. To fix the problem, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector pins.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light with the u1244 fault code, check the GPS Antenna and its wiring harness for any damage or poor electrical connection.
Visually inspect the related wiring harness and connectors for any broken, bent, pushed out, or corroded connector’s pins.
