The U1219 automobile fault code indicates a problem with the Audio and Video (AV) Control Unit, which can cause the engine light to turn on. This fault code can be caused by a faulty AV Control Unit, an open or shorted AV Control Unit harness, or a poor electrical connection in the AV Control Unit circuit. It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this fault code is estimated to be 1.0. To interpret the fault code, check the “Possible Causes” listed above and follow the recommended fix.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Steering? U1219 Could Be The Culprit
If you notice the Engine Light ON, it could be a sign of u1219 fault code.
Here are the symptoms to look out for:
- The automobile fault code U1219 can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
- The vehicle may also experience problems with the speedometer, such as it not working or displaying incorrect readings.
- Additionally, the vehicle’s ABS system may malfunction, causing the ABS warning light to turn on.
- Finally, the vehicle may experience issues with the power steering, such as difficulty steering or the power steering pump making unusual noises.
Decoding U1219: Common Causes
The automobile fault code u1219 can be caused by various factors, including a faulty AV control unit, open or shorted harness, and poor electrical connection.
- The automobile fault code U1219 can be caused by a faulty Audio and Video (AV) Control Unit.
- It can also be caused by an open or shorted Audio and Video Control Unit harness.
- Additionally, a poor electrical connection in the Audio and Video Control Unit circuit can also trigger this fault code.
Fix U1219: Simple Steps To Solve The Fault Code
Below are the possible fixes for the automobile fault code u1219, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1219, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1219 Repair Cost & Complexity
The automobile fault code U1219 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
Therefore, the total cost of fixing the U1219 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to diagnose and fix the issue.
U1219: When Your Car’s Communication Goes Silent
The U1219 fault code is related to the Audio and Video (AV) Control Unit in an automobile. It occurs when the AV Control Unit detects an internal malfunction of the Hard Disk Drive (HDD) read function.
The HDD allows for storage of map and music data and is the master unit of the MULTI AV system. The AV Control Unit operates each system according to communication signals from the AV Control Unit. It is connected to the ECM and combination meter via CAN communication to obtain necessary information for the vehicle information function.
FAQ
If your engine light is on and you’re seeing the u1219 fault code, it could be due to a faulty Audio and Video Control Unit, an open or shorted harness, or poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1219 fault code, indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Audio and Video (AV) Control Unit, an open or shorted AV Control Unit harness, or a poor electrical connection in the AV Control Unit circuit. To fix this issue, visually inspect the related wiring harness and connectors, checking for damaged components and broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1219 fault code in your automobile, you may notice that the engine light is on or the service engine soon warning light is illuminated. This issue is caused by a faulty Audio and Video (AV) Control Unit, an open or shorted Audio and Video Control Unit harness, or a poor electrical connection in the Audio and Video Control Unit circuit. To fix this problem, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a u1219 fault code, check the AV Control Unit and its wiring harness for any damage or poor electrical connections.
Visually inspect the components and connectors for any issues.
