The U1217 automobile fault code indicates a problem with the Audio and Video (AV) Control Unit.
The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty AV Control Unit, an open or shorted AV Control Unit harness, or a poor electrical connection in the AV Control Unit circuit. The importance of repairing this issue lies in the fact that it can affect the performance of the vehicle’s audio and video system.
The repair difficulty is moderate, and it takes approximately 1.0 hour to fix. To interpret the fault code, one should check the possible causes listed above and visually inspect the related wiring harness and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode U1217: Unveiling Symptoms Of This Fault Code
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1217 fault code.
Here are the symptoms to look out for:
- The U1217 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the ABS system, problems with the speedometer, and difficulty shifting gears.
- Additionally, the vehicle may experience a loss of power or acceleration, and the transmission may go into limp mode.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
Decoding U1217: Common Causes Of The Fault Code
The automobile fault code u1217 can be caused by various factors, including a faulty AV control unit and poor electrical connections.
- The automobile fault code U1217 can be caused by a faulty Audio and Video (AV) Control Unit.
- It can also be caused by an open or shorted Audio and Video Control Unit harness.
- Additionally, a poor electrical connection in the Audio and Video Control Unit circuit can also trigger this fault code.
Fix U1217: Simple Steps To Solve The Issue
To fix the u1217 automobile fault code, check the possible causes and inspect the related wiring harness, connectors, and components for damage.
- To fix the automobile fault code u1217, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1217 Repair Cost & Complexity
The automobile fault code U1217 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of fixing the U1217 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time.
U1217: Lost Communication With Steering Angle Sensor
The U1217 fault code is related to the Bluetooth module in the Audio and Video Control Unit of a vehicle. This code is triggered when the AV Control Unit detects a connection failure to the internal Bluetooth subunit.
The Diagnostic Trouble Code (DTC) U1217 indicates that there is an issue with the Bluetooth module, which may result in the inability to connect to Bluetooth devices.
If this code appears, it is recommended to have the Bluetooth module checked and repaired by a professional mechanic to ensure proper functionality.
FAQ
If your engine light is on and you’re seeing the u1217 fault code, it could be due to a faulty Audio and Video Control Unit, an open or shorted harness, or poor electrical connection. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing an illuminated engine light or service engine soon warning light, it could be due to a faulty Audio and Video (AV) Control Unit, an open or shorted AV Control Unit harness, or a poor electrical connection in the AV Control Unit circuit. To fix this, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1217 fault code, you may notice that your engine light is on. This could be due to a faulty Audio and Video (AV) Control Unit, an open or shorted harness, or poor electrical connection. To troubleshoot this issue, visually inspect the wiring harness and connectors related to the AV Control Unit. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the “Possible Causes” listed above for additional guidance.
Wrap Up
If your engine light is on and you have a u1217 fault code, it may be due to a faulty Audio and Video Control Unit or a poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion and check for broken or bent pins.
