The automobile fault code U11C9 indicates a problem with the Powertrain Control Module (PCM) or Anti-Lock Brake System (ABS) Module, resulting in the Engine Light ON or Service Engine Soon Warning Light.
To fix this issue, one needs to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0.
It is crucial to address this problem as soon as possible to avoid further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decoding U11C9: Unveiling Symptoms Of The Fault Code
If you notice the Engine Light ON, it could be a sign of u11c9 fault code. Here are the symptoms to look out for:
- The automobile fault code U11C9 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U11C9: Common Causes Of The Fault Code
The automobile fault code u11c9 can be caused by a faulty PCM or ABS module. Read on for more causes.
- The automobile fault code U11C9 can be caused by a faulty Powertrain Control Module (PCM).
- It can also be caused by a faulty Anti-Lock Brake System (ABS) Module.
- These are the only two known causes of the U11C9 fault code.
Fix U11C9: Quick Steps To Solve The Issue
Below are the possible fixes for the automobile fault code u11c9, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u11c9, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U11C9 Repair Cost & Complexity
The automobile fault code U11C9 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U11C9 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
U11C9: Lost Communication With Steering Angle Sensor
The U11C9 fault code is related to the left front wheel speed signal.
This signal is sent by the Electronic Stability Program (ESP) via a Controller Area Network (CAN) message.
The diagnostic checks the availability of the signal by checking the valid bit.
The DTC sets when the read value does not match the written value in any RAM location.
The U11C9 code indicates that the left front wheel speed message has been lost.
FAQ
If you see the engine light ON or Service Engine Soon Warning Light, it could be due to the u11c9 fault code. The possible causes of this fault code are a faulty Powertrain Control Module (PCM) or a faulty Anti-Lock Brake System (ABS) Module. To fix this issue, you need to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u11c9 automobile fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be caused by a faulty Powertrain Control Module (PCM) or Anti-Lock Brake System (ABS) Module. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and allow you to fix them accordingly.
If you’re trying to fix the u11c9 automobile fault code, you should look out for the symptom of the engine light being on, or the service engine soon warning light. The cause of this issue could be a faulty Powertrain Control Module (PCM) or Anti-Lock Brake System (ABS) Module. To fix this, you should visually inspect the related wiring harness and connectors, and check for damaged components. Additionally, keep an eye out for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty Powertrain Control Module (PCM) or Anti-Lock Brake System (ABS) Module.
Check the wiring harness and connectors for damage or corrosion.
Look for broken, bent, or pushed out pins.
Take action to fix the issue.
