[SOLVED] U119F Code: Fixing Lost Communication With Pedestrian Protection Sensor

The automobile fault code U119F indicates a problem with the right pedestrian protection satellite acceleration sensor or its circuit. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause could be a faulty sensor, an open or shorted harness, or a poor electrical connection.

The repair is of moderate difficulty and importance, with a recommended repair time of 1.0. To fix the issue, one should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins. It is essential to check the possible causes listed above to interpret the fault code correctly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u119f fault code.

Here are the symptoms to look out for:

  • The automobile fault code U119F has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The automobile fault code u119f can be caused by a range of issues, including faulty sensors and poor electrical connections.

  • The automobile fault code u119f can be caused by a faulty Right Pedestrian Protection Satellite Acceleration Sensor.
  • It can also be caused by an open or shorted harness of the Right Pedestrian Protection Satellite Acceleration Sensor.
  • Another cause can be a poor electrical connection in the Right Pedestrian Protection Satellite Acceleration Sensor circuit.
  • Lastly, a faulty Electronic Pedestrian Protection Module (EPPM) can also cause this fault code.

To fix the u119f fault code, check the possible causes and inspect related wiring harness, connectors, and components for damage.

  • To fix the automobile fault code u119f, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U119F can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.

Therefore, the total cost of diagnosis and fixing the U119F fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U119F code indicates a lost communication with the right pedestrian protection satellite acceleration sensor. This fault is latched for the entire ignition cycle and will set active if the loss of communication with the sensor has lasted for more than 2.5 seconds. The repair of this fault involves verifying the integrity of the wiring between the Electronic Pedestrian Protection module (EPPM) and the sensor.

Once the fault is repaired, it will go stored on the next key cycle upon the fault not setting for longer than 2.5 seconds.

What are the possible causes of the u119f automobile fault code?

If you’re experiencing the u119f automobile fault code, your engine light may be on. This could be due to a faulty right pedestrian protection satellite acceleration sensor, an open or shorted harness, a poor electrical connection in the sensor circuit, or a faulty electronic pedestrian protection module. To fix the issue, check the possible causes listed above, visually inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

How can I fix the u119f automobile fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the u119f automobile fault code, there are a few things you can do to fix it. First, check the possible causes, which include a faulty Right Pedestrian Protection Satellite Acceleration Sensor, an open or shorted harness, poor electrical connection, or a faulty Electronic Pedestrian Protection Module (EPPM). Next, visually inspect the wiring harness and connectors for any damage or broken, bent, pushed out, or corroded pins.

What should I visually inspect to troubleshoot the u119f automobile fault code?

If you’re troubleshooting the u119f automobile fault code, start by checking for an illuminated Engine Light or Service Engine Soon Warning Light. The code may be caused by a faulty Right Pedestrian Protection Satellite Acceleration Sensor, an open or shorted harness, a poor electrical connection, or a faulty Electronic Pedestrian Protection Module (EPPM). To fix the issue, visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken, bent, or pushed out connector pins.

u119f error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light with the u119f code, check the Right Pedestrian Protection Satellite Acceleration Sensor and its harness for faults.

Inspect the wiring harness and connectors for damage, and check for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top