If you see the engine light on or the service engine soon warning light, it could be due to the automobile fault code U119E.
This code indicates a problem with the left pedestrian protection satellite acceleration sensor or its related components. The possible causes include a faulty sensor, an open or shorted harness, poor electrical connection, or a faulty electronic pedestrian protection module.
The repair time for this fault code is 1.0, and it’s important to fix it as soon as possible to avoid any safety issues. To interpret the fault code, you need to check the possible causes listed above and visually inspect the related wiring harness and connectors.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode U119E: Unveiling Symptoms Of This Fault Code
If you notice the Engine Light ON, it could be a sign of u119e fault code. Here are the symptoms to look out for:
- The U119E fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
- The vehicle may also experience a decrease in power or acceleration, and the engine may stall or hesitate during operation.
- Additionally, the vehicle’s fuel efficiency may decrease, and there may be issues with the vehicle’s emissions.
Decoding U119E: Common Causes Of The Fault Code
The automobile fault code u119e can be caused by various factors, including a faulty sensor or poor electrical connection.
- The automobile fault code U119E can be caused by a faulty left pedestrian protection satellite acceleration sensor.
- It can also be caused by an open or shorted harness of the left pedestrian protection satellite acceleration sensor.
- Another cause can be a poor electrical connection in the left pedestrian protection satellite acceleration sensor circuit.
- Lastly, a faulty electronic pedestrian protection module (EPPM) can also cause the U119E fault code.
Fix U119E Code: Simple Steps To Get Your Car Running
To fix the u119e fault code, check the possible causes and inspect the wiring harness, connectors, and components for damage.
- To fix the automobile fault code u119e, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U119E Repair Cost & Complexity
The automobile fault code U119E has an estimated repair time of 1.0 hour. The cost of fixing this code varies depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. These factors are influential in determining the overall cost of fixing the U119E fault code.
U119E: Lost Communication With Active Grille Air Shutter “A” Control Module
The U119E fault code indicates a loss of communication with the left pedestrian protection satellite acceleration sensor. This code is set when the Electronic Pedestrian Protection Module (EPPM) no longer receives status updates from the sensor. The fault will be stored for the entire ignition cycle and will only clear if the communication is restored for more than 2.5 seconds.
To repair this fault, the wiring between the EPPM and the sensor must be checked for integrity.
FAQ
If you’re experiencing the u119e automobile fault code, you may notice that your engine light is on or that the service engine soon warning light is illuminated. This issue is typically caused by a faulty left pedestrian protection satellite acceleration sensor, an open or shorted harness, a poor electrical connection in the sensor circuit, or a faulty electronic pedestrian protection module (EPPM). To fix the issue, it’s important to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u119e automobile fault code, you may notice that your engine light is on. This could be due to a faulty left pedestrian protection satellite acceleration sensor, an open or shorted harness, a poor electrical connection in the sensor circuit, or a faulty electronic pedestrian protection module. To fix the issue, check the possible causes listed above and visually inspect the wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.
The u119e fault code is related to the left pedestrian protection system. The engine light or service engine soon warning light may turn on due to a faulty left pedestrian protection satellite acceleration sensor, an open or shorted harness, poor electrical connection, or a faulty electronic pedestrian protection module. To fix the issue, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty Left Pedestrian Protection Satellite Acceleration Sensor or a poor electrical connection.
To fix it, visually inspect the wiring harness and connectors for damage and check for broken or corroded pins.
