The automobile fault code U1192 indicates a problem with the Lower Switch Bank in the vehicle.

The most common symptom is the Engine Light turning on or the Service Engine Soon Warning Light.

The cause of this issue could be a faulty Lower Switch Bank, an open or shorted harness, poor electrical connection, or a faulty cluster. It is important to address this issue promptly as it can lead to further damage to the vehicle.

The repair time for this issue is estimated to be around 1.0.

To fix the problem, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON, it could be due to the u1192 fault code.

Here are the symptoms to look out for:

  • The automobile fault code U1192 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The automobile fault code u1192 can be caused by a faulty lower switch bank, open or shorted harness, poor electrical connection, or a faulty cluster.

  • The automobile fault code U1192 can be caused by a faulty lower switch bank.
  • It can also be caused by an open or shorted lower switch bank harness.
  • Poor electrical connection in the lower switch bank circuit can also trigger this fault code.
  • Another possible cause is a faulty cluster.

Below are some possible fixes for the automobile fault code u1192, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u1192, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U1192 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

Therefore, the total cost of diagnosis and fixing the U1192 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The u1192 fault code is a Diagnostic Trouble Code (DTC). It sets when the Cluster does not receive information from the Lower Switch Bank. The code indicates that there is a communication problem between the Cluster and the Lower Switch Bank. The u1192 code is also known as Lost Communication With Lower Switch Bank. This fault code can cause issues with the vehicle’s electrical system and may affect the functionality of certain features.

It is important to address this issue promptly to avoid further damage to the vehicle.

What are the possible causes of the u1192 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u1192 fault code. This code is often caused by a faulty lower switch bank, an open or shorted lower switch bank harness, a poor electrical connection in the lower switch bank circuit, or a faulty cluster. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Lower Switch Bank?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Lower Switch Bank, open or shorted harness, poor electrical connection in the circuit, or a faulty cluster. To fix this issue, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the u1192 fault code?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the u1192 fault code, you should visually inspect the related wiring harness and connectors. Check for any possible causes listed above and ensure that the Lower Switch Bank harness is not open or shorted. It is important to fix any faulty components and ensure that the Lower Switch Bank circuit has a good electrical connection.

u1192 error fault code explained

If your engine light is on, it could be due to a faulty lower switch bank, open or shorted harness, poor electrical connection, or a faulty cluster.

Check the possible causes, inspect the wiring harness and connectors, and look for damaged components or corroded pins.

Scroll to Top