The automobile fault code U1189 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a need for service.

The cause of this issue could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit.

It is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1189 fault code.

Here are the symptoms to look out for:

  • The U1189 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON, issues with the transmission, problems with the fuel system, difficulty starting the engine, rough idling, stalling, reduced power, and decreased fuel efficiency.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving.

The automobile fault code u1189 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.

  • The automobile fault code U1189 can be caused by a faulty module that is not communicating.
  • It can also be caused by an open or shorted module harness.
  • Additionally, a poor electrical connection in the module circuit can also trigger this fault code.

To fix the automobile fault code u1189, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code u1189, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U1189 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U1189 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U1189 code is related to the class 2 serial data circuit in automobiles. Modules monitor serial data communications during normal vehicle operation.

If a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1189 code is set.

This code indicates that there is invalid or missing data for Primary I.

What are the possible causes of the u1189 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u1189 automobile fault code. This code is usually caused by a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the u1189 fault code?

If you’re experiencing the u1189 fault code, which is indicated by the engine light being on or the service engine soon warning light, there are a few things you can do to fix it. The cause of this issue could be a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To address this problem, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the signs of damaged components that I should look for when fixing the u1189 fault code?

If you’re dealing with the u1189 fault code, you may notice that the engine light is on or the service engine soon warning light is illuminated. This could be caused by a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix the issue, start by checking the possible causes listed above. Then, visually inspect the related wiring harness and connectors for any signs of damage, such as broken, bent, pushed out, or corroded connector pins.

u1189 error fault code explained

If your engine light is on, it could be due to a faulty module or poor electrical connection. Check the wiring harness and connectors for damage or corrosion.

Look for broken, bent, or pushed out pins. Inspect the module and circuit for any issues.

Scroll to Top