The automobile fault code U1173 indicates a problem with the Power Roof Module (PRM) in your vehicle. The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this fault code could be a faulty PRM, an open or shorted PRM harness, or a poor electrical connection in the PRM circuit.
It is important to address this issue promptly as it can lead to further damage to your vehicle.
The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this issue is estimated to be around 1.0 hour.
It is crucial to interpret the fault code correctly to ensure the proper repair is made.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U1173: Common Symptoms You Should Know
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1173 fault code. Here are the symptoms to look out for:
- The U1173 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON, issues with the transmission, problems with the ABS system, issues with the traction control system, problems with the stability control system, and issues with the cruise control system.
- It is important to address these symptoms promptly to avoid further damage to the vehicle.
Decoding U1173: Common Causes Of The Fault Code
The automobile fault code u1173 can be caused by various factors, including a faulty Power Roof Module (PRM), open or shorted PRM harness, and poor electrical connection in the PRM circuit.
- The automobile fault code U1173 can be caused by a faulty Power Roof Module (PRM).
- It can also be caused by an open or shorted Power Roof Module harness.
- Additionally, a poor electrical connection in the Power Roof Module circuit can also trigger this fault code.
Fix U1173: Simple Steps To Solve The Issue
Below are some possible fixes for the automobile fault code u1173, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1173, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1173 Fixing Cost And Complexity
The automobile fault code U1173 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
Therefore, the total cost of fixing the U1173 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to diagnose and fix the issue.
Decoding U1173: Understanding Your Car’s Abs System Fault
The U1173 code is related to the class 2 serial data circuit in automobiles. Modules monitor for serial data communications during normal vehicle operation.
When a critical operating parameter is not received, the module uses a default value for that parameter.
If no message is detected from a learned identification number for 5 seconds, a Diagnostic Trouble Code (DTC) U1173 is set.
This code indicates that there is a lost communication with the power roof module.
FAQ
If you see the engine light or service engine soon warning light on your dashboard, it could be due to the u1173 fault code. This code is triggered by a faulty Power Roof Module (PRM), an open or shorted PRM harness, or a poor electrical connection in the PRM circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1173 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Power Roof Module (PRM), an open or shorted Power Roof Module harness, or a poor electrical connection in the Power Roof Module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re trying to fix the u1173 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. The cause of this issue could be a faulty Power Roof Module (PRM), an open or shorted PRM harness, or a poor electrical connection in the PRM circuit. To fix the problem, visually inspect the wiring harness and connectors, and check for damaged components or broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a u1173 fault code, it may be due to a faulty Power Roof Module or poor electrical connection.
To fix it, visually inspect the wiring harness and connectors for damage or corrosion.
Check for broken or bent pins.
