The automobile fault code U1172 indicates a problem with a module that is not communicating properly.
This can cause the engine light to turn on, indicating a need for service.
The cause of this issue could be a faulty module, an open or shorted module harness, or poor electrical connections. It is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated at 1.0, and it is crucial to address the problem promptly to avoid further damage to the vehicle.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and follow the suggested fix.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Steering? U1172 Could Be The Culprit
If you notice the Engine Light ON, it could be due to the u1172 fault code.
Here are the symptoms to look out for:
- The automobile fault code U1172 has the following symptoms: Engine Light ON (or Service Engine Soon Warning Light).
Decoding U1172: Common Causes & Fixes
The automobile fault code u1172 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.
- The automobile fault code U1172 can be caused by a faulty module that is not communicating.
- It can also be caused by an open or shorted module harness.
- Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
Fix U1172: Simple Steps To Solve The Issue
Below are some possible fixes for the automobile fault code u1172, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1172, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1172 Repair Cost & Complexity
The automobile fault code U1172 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the U1172 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
Unlocking The Mystery Of U1172 Fault Code
The U1172 code is related to the class 2 serial data circuit in automobiles. Modules in the circuit monitor for serial data communications during normal vehicle operation.
When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1172 Diagnostic Trouble Code (DTC) is set.
This code specifically indicates invalid or missing data for remote button control.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u1172 automobile fault code. This code is caused by a faulty module that is not communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the U1172 fault code, which is indicated by the engine light or service engine soon warning light turning on, there are a few things you can do to fix it. The cause of this issue could be a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To address this problem, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
Ignoring the u1172 fault code can lead to serious consequences such as reduced engine performance, decreased fuel efficiency, and potential damage to other engine components. The fault code indicates a faulty module that is not communicating, an open or shorted module harness, or poor electrical connection. It is important to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins to fix the issue.
Wrap Up
If your engine light is on, it could be due to a faulty module or poor electrical connection. Check the wiring harness and connectors for damage or corrosion.
Look for broken, bent, or pushed out pins.
Inspect the module and circuit for any issues.
