The automobile fault code U1164 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a need for service. The cause of this issue could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit.
It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this issue is estimated to be around 1.0, and it is crucial to address this problem promptly to avoid further damage to the vehicle. To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Accelerator? U1164 Could Be The Culprit
If you notice the Engine Light ON, it could be due to the u1164 fault code. Here are some symptoms to look out for:
- The automobile fault code U1164 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U1164: Common Causes Of The Fault Code
The automobile fault code u1164 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.
- The automobile fault code u1164 can be caused by a faulty module that is not communicating.
- It can also be caused by an open or shorted module harness.
- Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
Fix U1164: Simple Steps To Solve The Issue
Below are the possible fixes for the automobile fault code u1164.
- To fix the automobile fault code u1164, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1164 Repair Cost & Complexity
The automobile fault code U1164 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosing and fixing the U1164 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.
U1164: Unraveling The Mystery Of Lost Communication With Body Control Module
The U1164 fault code is related to the class 2 serial data circuit in automobiles. Modules in the circuit monitor for serial data communications during normal vehicle operation.
When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1164 Diagnostic Trouble Code (DTC) is set.
This fault code specifically indicates invalid or missing data for tunerreceiver.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u1164 automobile fault code. This code is caused by a faulty module that is not communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1164 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. The cause of this issue could be a faulty module that is not communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To address this problem, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re dealing with a u1164 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. The cause of this issue could be a faulty module that isn’t communicating, an open or shorted module harness, or a module circuit with poor electrical connection. To fix the problem, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components such as broken, bent, pushed out, or corroded connector pins.
Wrap Up
If your engine light is on due to a faulty module that is not communicating, module harness being open or shorted, or module circuit poor electrical connection, visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
