The automobile fault code U1159 indicates a problem with the Automatic Sway Bar System Module (ASBS) or Final Drive Control Module (FDCM), or a faulty Occupant Restraint Controller (ORC).
The most common symptom is the Engine Light ON or Service Engine Soon Warning Light.
To fix the issue, one needs to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
The repair time is estimated to be 1.0, and it is crucial to address the issue promptly to avoid further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U1159: Common Symptoms You Shouldn’t Ignore
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of u1159 fault code. Here are the symptoms to look out for:
- The automobile fault code U1159 has the following symptoms: Engine Light ON (or Service Engine Soon Warning Light).
Decoding U1159: Common Causes Of The Fault Code
The automobile fault code u1159 can be caused by a faulty ASBS or FDCM module, open or shorted harness, poor electrical connection, or a faulty ORC.
- The automobile fault code U1159 can be caused by a faulty Automatic Sway Bar System Module (ASBS) or Final Drive Control Module (FDCM).
- It can also be caused by an open or shorted ASBS or FDCM harness, or a poor electrical connection in the ASBS or FDCM circuit.
- Another possible cause is a faulty Occupant Restraint Controller (ORC).
Fix U1159: Quick Steps To Solve The Fault Code
To fix the u1159 automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.
- To fix the automobile fault code u1159, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1159 Repair Cost & Complexity
The automobile fault code U1159 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U1159 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
Decoding U1159: Understanding The Lost Communication With Hvac Control Module
The u1159 fault code is related to the Occupant Restraint Controller (ORC) BUS messages not being received from the Automatic Sway Bar System Module (ASBS) or Final Drive Control Module (FDCM) for around two to five seconds. This code indicates that there is a communication problem between the ORC and the ASBS or FDCM.
The u1159 code is specifically related to the Automatic Sway Bar System Module (ASBS) and is triggered when the ORC does not receive messages from the ASBS for a certain period of time.
FAQ
If your engine light is on and you’re seeing the u1159 fault code, it could be due to a faulty Automatic Sway Bar System Module (ASBS) or Final Drive Control Module (FDCM), an open or shorted ASBS or FDCM harness, a poor electrical connection in the ASBS or FDCM circuit, or a faulty Occupant Restraint Controller (ORC). To fix the issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u1159 automobile fault code, which is indicated by the engine light being on, it could be due to a faulty Automatic Sway Bar System Module (ASBS) or Final Drive Control Module (FDCM), an open or shorted ASBS or FDCM harness, a poor electrical connection in the ASBS or FDCM circuit, or a faulty Occupant Restraint Controller (ORC). To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
A faulty Occupant Restraint Controller (ORC) is listed as one of the possible causes of the u1159 automobile fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light. To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and you have a u1159 fault code, check for a faulty Automatic Sway Bar System Module (ASBS) or Final Drive Control Module (FDCM), open or shorted harness, poor electrical connection, or a faulty Occupant Restraint Controller (ORC).
Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.
