The automobile fault code U1158 indicates a problem with the Satellite Video Receiver (SDARV) in your vehicle.
The most common symptom is the Engine Light turning on or the Service Engine Soon Warning Light. The cause of this issue could be a faulty receiver, an open or shorted harness, or a poor electrical connection.
It is important to address this issue promptly as it can affect the performance of your vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.
The repair time for this issue is estimated to be around 1.0 hour.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U1158: Common Symptoms You Shouldn’t Ignore
If you notice the Engine Light ON, it could be a sign of u1158 fault code. Here are the symptoms to look out for:
- The fault code u1158 is associated with several symptoms, including the engine light being on or the service engine soon warning light being illuminated.
- Other symptoms may include issues with the vehicle’s transmission, such as difficulty shifting gears or the transmission slipping.
- Additionally, the vehicle may experience reduced power or acceleration, and the engine may run rough or stall.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe operation on the road.
Decoding U1158: Common Causes Of The Fault Code
The automobile fault code u1158 can be caused by a faulty receiver, open or shorted harness, or poor electrical connection.
- The automobile fault code u1158 can be caused by a faulty Satellite Video Receiver (SDARV).
- It can also be caused by an open or shorted Satellite Video Receiver harness.
- Additionally, a poor electrical connection in the Satellite Video Receiver circuit can also trigger this fault code.
Fix U1158: Simple Steps To Solve The Issue
Below are some possible fixes for the automobile fault code u1158, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u1158, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1158 Diagnosis Cost & Complexity
The automobile fault code U1158 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services.
Therefore, the fixing cost of U1158 will be between $75 and $150, depending on the repair time required.
U1158: Your Car’s Communication Breakdown Explained
The u1158 fault code is related to the Satellite Video Receiver (SDARV). This code sets when the SDARV fails to send bus messages for two to five seconds. The Diagnostic Trouble Code (DTC) indicates a lost communication with the SDARV.
This fault code can cause issues with the vehicle’s audio and video systems. It is important to diagnose and fix this issue to ensure proper functioning of the vehicle’s entertainment system.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u1158 fault code. This code is caused by a faulty satellite video receiver (SDARV), an open or shorted harness, or poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1158 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you may have a faulty Satellite Video Receiver (SDARV), an open or shorted Satellite Video Receiver harness, or a poor electrical connection in the Satellite Video Receiver circuit. To fix this issue, you should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
If the engine light is on or the service engine soon warning light is illuminated, it could be a sign of a faulty Satellite Video Receiver (SDARV) or an open or shorted Satellite Video Receiver harness. The cause could also be a poor electrical connection in the Satellite Video Receiver circuit. To fix this issue, it is recommended to visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on, it could be due to a faulty satellite video receiver (SDARV), an open or shorted harness, or poor electrical connection.
Visually inspect the wiring harness and connectors for damage or corrosion.
Check for broken, bent, or pushed out connector pins.
