The automobile fault code U1155 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a need for service. The cause of this issue could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit.

It is important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated at 1.0, and it is crucial to address the problem promptly to avoid further damage to the vehicle.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and follow the suggested fix.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1155 fault code. Here are the symptoms to look out for:

  • The automobile fault code U1155 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The automobile fault code u1155 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.

  • The automobile fault code U1155 can be caused by a faulty module that is not communicating.
  • It can also be caused by an open or shorted module harness.
  • Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
  • These are the three main causes of the U1155 fault code in automobiles.

Below are the possible fixes for the automobile fault code u1155.

  • To fix the automobile fault code u1155, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U1155 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U1155 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U1155 fault code is related to the class 2 serial data circuit in automobiles. Modules in the circuit monitor for serial data communications during normal vehicle operation.

When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1155 Diagnostic Trouble Code (DTC) is set. This code indicates that there is invalid or missing data for compa.

What are the possible causes of the u1155 automobile fault code that triggers the engine light or service engine soon warning light?

If you see the engine light or service engine soon warning light on your dashboard, it could be due to the u1155 fault code. This code is usually caused by a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can you fix the u1155 automobile fault code issue?

If you’re experiencing the u1155 automobile fault code issue, you may notice that your engine light is on or that the service engine soon warning light is illuminated. This issue is typically caused by a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

What steps should you take to visually inspect the related wiring harness and connectors to identify the cause of the u1155 automobile fault code?

If you’re experiencing the u1155 automobile fault code, start by checking the engine light or service engine soon warning light. The cause could be a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To identify the cause, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins. Check the “Possible Causes” listed above for further guidance.

u1155 error fault code explained

If your engine light is on, it could be due to a faulty module or poor electrical connection.

Check the wiring harness and connectors for damage or corrosion. Look for broken, bent, or pushed out pins. Inspect the module and circuit for any issues.

Scroll to Top