The automobile fault code U113F indicates a problem with the Active Exhaust Valve Actuator. The most common symptom is the Engine Light turning on. The cause of this issue could be a faulty actuator, an open or shorted harness, poor electrical connection, or a faulty Powertrain Control Module.

It is important to address this issue promptly as it can lead to decreased engine performance and fuel efficiency. The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and inspect the related components thoroughly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of u113f fault code. Here are the symptoms to look out for:

  • The automobile fault code U113F has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.

The automobile fault code u113f can be caused by a faulty actuator, poor electrical connection, or a faulty PCM.

  • The automobile fault code U113F can be caused by a faulty Active Exhaust Valve Actuator.
  • It can also be caused by an open or shorted Active Exhaust Valve Actuator harness.
  • Poor electrical connection in the Active Exhaust Valve Actuator circuit can also trigger this fault code.
  • Lastly, a faulty Powertrain Control Module (PCM) can also be a cause of the U113F fault code.

To fix the u113f automobile fault code, check the possible causes and inspect related wiring harness and connectors for damage.

  • To fix the automobile fault code u113f, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code U113F is a communication error between the vehicle’s control module and the fuel injector. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this fault code varies depending on the auto repair shop, but it is common for most shops to charge between $75 and $150 per hour.

Other factors that may influence the cost of fixing this fault code include the severity of the issue, the type of vehicle, and the location of the repair shop.

The u113f fault code is a Diagnostic Trouble Code (DTC) that is set when the Powertrain Control Module (PCM) detects a loss of Local Interconnect Network (LIN) communication for more than 2.6 seconds. This fault code specifically indicates that there is a loss of communication with the Active Exhaust Valve. The Active Exhaust Valve is responsible for controlling the exhaust flow and noise level of the vehicle.

When communication with this component is lost, it can result in poor engine performance and increased exhaust noise. If you receive the u113f fault code, it is important to have your vehicle inspected by a qualified mechanic to diagnose and repair the issue.

What are the possible causes of the u113f automobile fault code?

If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the u113f fault code. This code is typically caused by a faulty Active Exhaust Valve Actuator, an open or shorted harness, poor electrical connection in the circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, it’s recommended to visually inspect the wiring harness and connectors for any damage or corrosion, and check for broken or bent pins.

How can I visually inspect the related wiring harness and connectors to fix the u113f fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to the u113f fault code, there are a few things you can do to fix it. First, check the possible causes, which include a faulty Active Exhaust Valve Actuator, an open or shorted harness, poor electrical connection, or a faulty Powertrain Control Module (PCM). To visually inspect the related wiring harness and connectors, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

Is it necessary to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins to fix the u113f fault code?

Yes, it is necessary to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins to fix the u113f fault code. This is because the fault can be caused by a faulty active exhaust valve actuator, an open or shorted actuator harness, a poor electrical connection in the actuator circuit, or a faulty powertrain control module. Visually inspecting the related wiring harness and connectors can help identify any issues and ensure a proper fix.

u113f error fault code explained

If your engine light is on and the code is u113f, check for a faulty active exhaust valve actuator, open or shorted harness, poor electrical connection, or a faulty PCM. Visually inspect the wiring harness and connectors for damage or corrosion. Look for broken, bent, pushed out, or corroded connector’s pins.

Scroll to Top