The automobile fault code U113B indicates a problem with the Switch Bank Module in your vehicle. This can cause the Engine Light or Service Engine Soon Warning Light to turn on. The cause of this issue could be a faulty Switch Bank Module, an open or shorted harness, or a poor electrical connection in the circuit.

It is important to address this issue promptly as it can affect the performance of your vehicle. The repair time for this issue is estimated to be around 1.0 hour. To fix this problem, you should visually inspect the wiring harness and connectors for any damage or corrosion.

Check for broken, bent, pushed out, or corroded connector pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u113b fault code.

Here are the symptoms to look out for:

  • The fault code U113B is associated with several symptoms, including the illumination of the engine light or service engine soon warning light.
  • Other symptoms may include issues with the vehicle’s transmission, such as difficulty shifting gears or slipping gears.
  • Additionally, the vehicle may experience a decrease in fuel efficiency or a loss of power while driving.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.

The automobile fault code u113b can be caused by a faulty switch bank module, open or shorted harness, or poor electrical connection.

  • The automobile fault code u113b can be caused by a faulty Switch Bank Module.
  • It can also be caused by an open or shorted Switch Bank Module harness.
  • Additionally, a poor electrical connection in the Switch Bank Module circuit can also trigger this fault code.

To fix the u113b automobile fault code, check the possible causes and inspect related components for damage or corrosion.

  • To fix the automobile fault code u113b, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U113B has an estimated repair time of 1.0 hour.

The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the fixing cost of U113B will range between $75 and $150, depending on the repair time required.

The u113b fault code is a Diagnostic Trouble Code (DTC) that indicates a problem with the communication between the Body Control Module (BCM) and the Switch Bank Module.

This code sets when the BCM does not receive information from the Switch Bank Module. The u113b code is specifically related to a lost communication issue with the Switch Bank Module. If this fault code appears, it is important to have the vehicle diagnosed and repaired as soon as possible to prevent further damage or safety issues.

What are the possible causes of the u113b automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u113b fault code. This code is caused by a faulty switch bank module, an open or shorted harness, or a poor electrical connection in the switch bank module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can the Switch Bank Module harness be checked for faults related to the u113b code?

If the engine light is on due to the u113b code, it could be caused by a faulty Switch Bank Module or an open or shorted Switch Bank Module harness. To fix this issue, it is recommended to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What steps should be taken to visually inspect the wiring harness and connectors for the u113b code?

If you’re experiencing the u113b code, which is indicated by the engine light being on, you should visually inspect the wiring harness and connectors. This is because the cause of the issue could be a faulty Switch Bank Module, an open or shorted harness, or a poor electrical connection. To fix the issue, check the possible causes listed above and inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector pins.

u113b error fault code explained

If your engine light is on and the code is u113b, it may be due to a faulty Switch Bank Module or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins. Take action to fix the issue based on the possible causes listed above.

Scroll to Top