The automobile fault code U1135 indicates a problem with a module that is not communicating properly. This can cause the engine light to turn on, indicating a potential issue. The cause of this fault code could be a faulty module, an open or shorted module harness, or a poor electrical connection in the module circuit.
It is important to visually inspect the wiring harness and connectors for any damage or corrosion.
The repair time for this fault code is estimated to be around 1.0.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and look for any broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unresponsive Wheel Speed Sensor: U1135 Symptoms
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u1135 fault code. Here are the symptoms to look out for:
- The automobile fault code U1135 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U1135: Common Causes Of The Fault Code
The automobile fault code u1135 can be caused by a faulty module, open or shorted module harness, or poor electrical connection.
- The automobile fault code U1135 can be caused by a faulty module that is not communicating.
- It can also be caused by an open or shorted module harness.
- Additionally, a poor electrical connection in the module circuit can also trigger this fault code.
Fix U1135: Quick Steps To Solve The Fault Code
Below are some possible fixes for the automobile fault code u1135.
- To fix the automobile fault code u1135, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U1135 Repair Cost & Complexity
The fault code U1135 is a communication error between the ABS module and the instrument cluster.
The estimated repair time for this fault code is 1.0 hour. The cost of fixing this fault code is influenced by the hourly rate charged by the auto repair shop.
Most auto repair shops charge between $75 and $150 per hour.
Therefore, the cost of fixing the U1135 fault code can range from $75 to $150.
Unlocking The Mystery Of U1135 Fault Code
The U1135 fault code is related to the class 2 serial data circuit in automobiles. Modules in the circuit monitor for serial data communications during normal vehicle operation. When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the U1135 Diagnostic Trouble Code (DTC) is set.
This fault code specifically indicates invalid or missing data for the ignition switch or Sta.
FAQ
If you see the engine light or service engine soon warning light on your dashboard, it could be due to the u1135 fault code. This code is usually caused by a faulty module that is not communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u1135 automobile fault code, you may notice that your engine light is on. This could be due to a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix this issue, start by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This should help you identify and resolve the issue.
If you’re trying to fix the u1135 automobile fault code, start by checking for the symptom of an engine light or service engine soon warning light. The cause could be a faulty module that isn’t communicating, an open or shorted module harness, or a poor electrical connection in the module circuit. To fix the issue, visually inspect the related wiring harness and connectors for any damage or broken, bent, pushed out, or corroded pins. Check the “Possible Causes” listed above for more information.
Wrap Up
If your engine light is on and the code is u1135, it could be due to a faulty module or poor electrical connection. To fix it, visually inspect the wiring harness and connectors for damage or corrosion. Check for broken or bent pins.
