The automobile fault code U1129 indicates a problem with the audio amplifier in the vehicle. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this fault code could be a faulty audio amplifier, an open or shorted audio amplifier harness, or a poor electrical connection in the audio amplifier circuit.

The importance of repairing this issue lies in the fact that it can affect the overall performance of the vehicle’s audio system. The repair difficulty is considered to be moderate, with a repair time of 1.0. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u1129 fault code.

Here are the symptoms to look out for:

  • The automobile fault code u1129 has several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
  • The vehicle may also experience reduced power or acceleration, and the fuel efficiency may decrease.
  • Additionally, the vehicle may experience stalling or hesitation when accelerating, and there may be a noticeable decrease in engine performance.
  • It is important to address these symptoms promptly to prevent further damage to the vehicle.

The automobile fault code u1129 can be caused by a faulty audio amplifier, open or shorted amplifier harness, or poor electrical connection.

  • The automobile fault code u1129 can be caused by a faulty audio amplifier.
  • It can also be caused by an open or shorted audio amplifier harness.
  • Additionally, a poor electrical connection in the audio amplifier circuit can also trigger this fault code.

To fix the u1129 automobile fault code, check the possible causes and inspect the wiring harness, connectors, and components for damage.

  • To fix the automobile fault code u1129, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U1129 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops. Therefore, the total cost of fixing the U1129 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.

The U1129 fault code is related to the class 2 serial data circuit in automobiles. Modules in the circuit monitor for serial data communications during normal vehicle operation.

When a module doesn’t receive a message for a critical operating parameter, it uses a default value for that parameter. If a module doesn’t receive a Node Alive message from a learned identification number for 5 seconds, a Diagnostic Trouble Code (DTC) U1129 is set. This fault code specifically indicates lost communications with the audio amplifier.

What are the possible causes of the u1129 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u1129 fault code. This code is usually caused by a faulty audio amplifier, an open or shorted audio amplifier harness, or a poor electrical connection in the audio amplifier circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the u1129 fault code?

If you’re experiencing the u1129 fault code, which is indicated by the engine light being on or the service engine soon warning light, there are a few things you can do to visually inspect the wiring harness and connectors. The cause of this issue could be a faulty audio amplifier, an open or shorted audio amplifier harness, or a poor electrical connection in the audio amplifier circuit. To fix this issue, you should check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What should I look for when checking for damaged components and connector pins related to the u1129 fault code?

If you’re experiencing the u1129 fault code, which is indicated by the engine light being on, you should check for a faulty audio amplifier, an open or shorted audio amplifier harness, or a poor electrical connection in the audio amplifier circuit. To fix this issue, visually inspect the wiring harness and connectors, and check for damaged components. Look for broken, bent, pushed out, or corroded connector pins.

u1129 error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Audio Amplifier, open or shorted Audio Amplifier harness, or poor electrical connection. Check the wiring harness and connectors for damage, broken, bent, pushed out, or corroded pins to fix the issue.

Scroll to Top