[SOLVED] Fixing U111D: Left Side Camera Image Signal Circuit Issue

The automobile fault code U111D indicates a problem with the left side camera in the vehicle. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this fault code could be a faulty left side camera, an open or shorted harness, or a poor electrical connection in the left side camera circuit.

It is important to address this issue promptly as it can affect the vehicle’s performance and safety. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be a sign of u111d fault code.

Here are the symptoms to look out for:

  • The U111D fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
  • These symptoms can indicate a problem with the vehicle’s communication network, specifically the loss of communication with the fuel and air metering control module.
  • It can also cause issues with the vehicle’s performance, such as reduced power or stalling.
  • If you experience any of these symptoms, it is important to have your vehicle diagnosed and repaired by a qualified mechanic.

The automobile fault code u111d can be caused by a faulty left side camera, open or shorted harness, or poor electrical connection.

  • The automobile fault code U111D can be caused by a faulty left side camera.
  • It can also be caused by an open or shorted left side camera harness.
  • Additionally, a poor electrical connection in the left side camera circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code u111d, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u111d, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code U111D is a communication error between the vehicle’s modules.

The estimated repair time for this issue is 1.0 hour. The cost of fixing this fault code can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

It is important to note that the cost may also depend on the severity of the issue and the parts that need to be replaced.

The U111D fault code is related to the Left Side Camera Image Signal Circuit.

This code is triggered when there is an open or short circuit in the image signal circuit of the left side camera.

The left side camera is responsible for capturing images of the left side of the vehicle and transmitting them to the vehicle’s computer system. When this circuit is compromised, it can affect the accuracy of the vehicle’s safety features, such as lane departure warning and blind spot detection. It is important to address this fault code promptly to ensure the safe operation of the vehicle.

What are the possible causes of the u111d automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u111d fault code. This code is usually caused by a faulty left side camera, an open or shorted left side camera harness, or a poor electrical connection in the left side camera circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the wiring harness and connectors related to the Left Side Camera?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a faulty Left Side Camera, Left Side Camera harness being open or shorted, or Left Side Camera circuit poor electrical connection, you can fix it by visually inspecting the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Make sure to check the “Possible Causes” listed above before proceeding with the inspection.

What should I do if I find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the u111d fault code?

If you find damaged components or broken, bent, pushed out, or corroded connector’s pins during the inspection for the u111d fault code, you should visually inspect the related wiring harness and connectors. Check for any possible causes listed above and look for any damaged components. It is important to fix any issues found to ensure the proper functioning of the left side camera and to turn off the engine light or service engine soon warning light.

u111d error fault code explained

If your engine light is on and the code is U111D, it may be due to a faulty left side camera or poor electrical connection.

To fix it, visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken or bent pins and damaged components.

Scroll to Top