The automobile fault code U0553 indicates a problem with the Rear Lighting Control Module ‘B’ in the vehicle. The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light.
The cause of this fault code could be a faulty Rear Lighting Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. It is important to visually inspect the related wiring harness and connectors for any damage or corrosion.
The repair time for this fault code is estimated to be 1.0.
To interpret the fault code, it is recommended to check the “Possible Causes” listed above and follow the suggested fix.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decoding U0553: Common Symptoms Of This Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be due to the u0553 fault code. Here are the symptoms to look out for:
- The fault code U0553 is associated with several symptoms, including the illumination of the engine light or service engine soon warning light.
- Other symptoms may include issues with the vehicle’s transmission, such as difficulty shifting gears or slipping gears.
- Additionally, the vehicle may experience a decrease in fuel efficiency or power, and the engine may run rough or stall.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe operation on the road.
Decoding U0553: Common Causes Of The Fault Code
The automobile fault code u0553 can be caused by a faulty module, open or shorted harness, or poor electrical connection.
- The automobile fault code U0553 can be caused by a faulty Rear Lighting Control Module ‘B’.
- It can also be caused by an open or shorted harness of the Rear Lighting Control Module ‘B’.
- Additionally, a poor electrical connection in the circuit of the Rear Lighting Control Module ‘B’ can also trigger this fault code.
Fix U0553: Simple Steps To Solve The Fault Code
To fix the u0553 automobile fault code, check the possible causes and inspect the related wiring harness, connectors, and components for damage.
- To fix the automobile fault code u0553, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U0553 Fixing Cost And Complexity
The fault code U0553 is a communication error between the vehicle’s control module and the instrument cluster. The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this fault code is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.
Therefore, the fixing cost of U0553 can range from $75 to $150 depending on the repair time required to fix the issue.
U0553: Lost Communication With Active Grille Air Shutter “A” Control Module
The U0553 fault code is related to the Rear Lighting Control Module ‘B’ in a vehicle. It indicates that the receiving device has detected a discrepancy in the information it receives from the module.
This causes the integrity of the information to be questioned, resulting in an invalid data Diagnostic Trouble Code (DTC) being set. The Rear Lighting Control Module ‘B’ is a device that controls the rear lighting system of a vehicle.
It communicates with other devices through a serial data communication network known as the Controller Area Network (CAN). The U0553 fault code is triggered when the module sends invalid data to the receiving device, causing a discrepancy in the information exchange. If the U0553 fault code is detected, it is important to have the Rear Lighting Control Module ‘B’ checked and repaired if necessary.
Ignoring the fault code can lead to issues with the rear lighting system, which can affect the safety of the vehicle.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u0553 fault code. This code is caused by a faulty rear lighting control module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u0553 fault code, you may notice that your engine light is on. This could be due to a faulty Rear Lighting Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components or broken, bent, pushed out, or corroded connector pins. Check the “Possible Causes” listed above for more information.
If you’re experiencing the u0553 fault code, you may notice that your engine light is on. This could be due to a faulty Rear Lighting Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To diagnose the issue, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Be sure to check the “Possible Causes” listed above for further guidance.
Wrap Up
If your engine light is on and the fault code is u0553, it may be due to a faulty Rear Lighting Control Module ‘B’, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector’s pins.
