The automobile fault code U0544 indicates a problem with the Parking Assist Control Module ‘B’.
The most common symptom is the illumination of the Engine Light or Service Engine Soon Warning Light. The cause of this fault code could be a faulty control module, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can affect the vehicle’s parking assist system.
The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated to be around 1.0 hour. To interpret the fault code, one needs to use an OBD-II scanner or code reader.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling U0544: Common Symptoms Of This Auto Fault Code
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of u0544 fault code. Here are the symptoms to look out for:
- The automobile fault code U0544 has the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON.
Decoding U0544: Common Causes Of The Fault Code
The automobile fault code u0544 can be caused by a faulty module, open or shorted harness, or poor electrical connection.
- The automobile fault code U0544 can be caused by a faulty Parking Assist Control Module ‘B’.
- It can also be caused by an open or shorted harness of the Parking Assist Control Module ‘B’.
- Additionally, a poor electrical connection in the Parking Assist Control Module ‘B’ circuit can also trigger this fault code.
Fix U0544: Simple Steps To Solve The Problem
Below are some possible fixes for the automobile fault code u0544, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code u0544, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U0544 Repair Cost & Complexity
The automobile fault code U0544 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.
Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of U0544 will range between $75 and $150, depending on the repair time required.
These factors should be considered when estimating the cost of fixing the U0544 fault code.
U0544: The Low-Speed Can Communication Bus Off Fault
The U0544 fault code is related to the Parking Assist Control Module ‘B’. This fault code is set when a receiving device detects a discrepancy in the information it receives from the Parking Assist Control Module ‘B’.
The discrepancy causes the integrity of the information to be questioned, resulting in the setting of the invalid data Diagnostic Trouble Code (DTC). The U0544 code indicates that there is an issue with the communication network between the devices in the vehicle, specifically with the Parking Assist Control Module ‘B’.
FAQ
If you see the engine light on or the service engine soon warning light, it could be due to the u0544 fault code. This code is caused by a faulty Parking Assist Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the u0544 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can fix it by visually inspecting the related wiring harness and connectors. This fault code is caused by a faulty Parking Assist Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit. To fix it, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Make sure to check the “Possible Causes” listed above before proceeding with the inspection.
If you’re dealing with the u0544 fault code, keep an eye out for the engine light turning on or the service engine soon warning light. The cause of this issue could be a faulty parking assist control module ‘B’, an open or shorted harness, or a poor electrical connection in the module’s circuit. To fix the problem, inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded connector pins.
Wrap Up
If your engine light is on, it could be due to a faulty Parking Assist Control Module ‘B’, an open or shorted harness, or poor electrical connection. Check the wiring harness and connectors for damage, broken or corroded pins, and inspect related components.
