If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Rocker Arm Control Module ‘A’.

The automobile fault code U041C indicates that the Rocker Arm Control Module ‘A’ harness is open or shorted, or there is a poor electrical connection in the circuit. It is important to visually inspect the related wiring harness and connectors for any damage or corrosion. The repair time for this fault code is 1.0, and it is of moderate difficulty.

To interpret the fault code, check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u041c fault code. Here are the symptoms to look out for:

  • The automobile fault code u041c has the following symptoms: Engine Light ON, Service Engine Soon Warning Light.

The automobile fault code u041c can be caused by a faulty module or poor electrical connection.

  • The automobile fault code u041c can be caused by a faulty Rocker Arm Control Module ‘A’.
  • It can also be caused by an open or shorted harness of the Rocker Arm Control Module ‘A’.
  • Additionally, a poor electrical connection in the circuit of the Rocker Arm Control Module ‘A’ can also trigger this fault code.

To fix the u041c automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code u041c, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code u041c has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time. Most auto repair shops charge between $75 and $150 per hour for their services.

Therefore, the cost of fixing the u041c fault code can range from $75 to $150, depending on the repair time required. It is important to consider these factors when seeking repairs for this fault code.

The u041C fault code is related to the Controller Area Network (CAN) in a vehicle. CAN is a standard that connects automotive devices without a host computer. The u041C code is set when a receiving device detects a discrepancy in the information it receives from the Rocker Arm Control Module ‘A’.

This discrepancy causes the receiving device to question the integrity of the information it receives, resulting in an invalid data Diagnostic Trouble Code (DTC).

What are the possible causes of the u041c automobile fault code?

If you’re experiencing the u041c fault code, your engine light may be on. This could be due to a faulty Rocker Arm Control Module ‘A’, an open or shorted harness, or a poor electrical connection in the circuit. To fix the issue, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors for the u041c fault code?

If you’re experiencing the u041c fault code, which is indicated by the engine light or service engine soon warning light being on, there are a few things you can do to visually inspect the related wiring harness and connectors. First, check for a faulty Rocker Arm Control Module ‘A’. Then, inspect the harness and connectors for any damage or poor electrical connections. Look for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues and determine the best course of action for fixing the problem.

What are the steps to take if I find broken, bent, pushed out, or corroded connector’s pins for the u041c fault code?

If you encounter broken, bent, pushed out, or corroded connector’s pins for the u041c fault code, follow these steps: Check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components. If you find any of these issues, replace or repair the damaged components and connectors. This will help fix the faulty Rocker Arm Control Module ‘A’ and ensure that the engine light or service engine soon warning light turns off.

u041c error fault code explained

If your engine light is on, it could be due to a faulty Rocker Arm Control Module ‘A’, an open or shorted harness, or poor electrical connection. Check the wiring harness and connectors for damage, broken or corroded pins, and inspect related components.

Scroll to Top