The automobile fault code U0417 indicates a problem with the Park Brake Control Module.

The most common symptom is the Engine Light ON or Service Engine Soon Warning Light. The cause of this fault code could be a faulty Park Brake Control Module, an open or shorted harness, or a poor electrical connection. It is important to address this issue promptly as it can affect the vehicle’s braking system.

The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time for this fault code is estimated to be 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the u0417 fault code. Here are the symptoms to look out for:

  • The fault code U0417 is associated with several symptoms that include the engine light turning on or the service engine soon warning light.
  • Other symptoms include the ABS warning light coming on, the speedometer not working, the traction control system not functioning properly, and the vehicle going into limp mode.
  • Additionally, the transmission may not shift properly, the engine may stall, and the fuel efficiency may decrease.
  • It is important to address these symptoms promptly to avoid further damage to the vehicle.

The u0417 fault code can be caused by a faulty module, open or shorted harness, or poor electrical connection.

  • The automobile fault code u0417 can be caused by a faulty Park Brake Control Module.
  • It can also be caused by an open or shorted Park Brake Control Module harness.
  • Additionally, a poor electrical connection in the Park Brake Control Module circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code u0417, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u0417, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code u0417 indicates an issue with the vehicle’s system voltage.

The estimated repair time for this fault code is 1.0 hour. The cost of diagnosis and fixing will depend on the hourly rate of the auto repair shop, which is typically between $75 and $150 per hour. Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.

It is important to address this fault code promptly to avoid further damage to the vehicle and ensure safe driving.

The U0417 fault code is related to the Park Brake Control Module in a vehicle.

This fault code indicates that the receiving device has detected invalid data from the Park Brake Control Module.

The discrepancy in the information received causes the integrity of the Park Brake Control Module to be questioned, triggering the Diagnostic Trouble Code (DTC).

This fault code is related to the Controller Area Network (CAN) in a vehicle, which is a standard designed to interconnect automotive devices without a host computer.

The U0417 fault code can be diagnosed using specialized equipment and fixed by repairing or replacing the Park Brake Control Module.

What are the possible causes of the u0417 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the u0417 fault code. This code is often caused by a faulty park brake control module, an open or shorted harness, or a poor electrical connection in the module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.

How can one visually inspect the related wiring harness and connectors to fix the u0417 fault code?

If you’re experiencing the u0417 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, there are a few things you can do to fix it. The cause of this issue could be a faulty Park Brake Control Module, an open or shorted harness, or a poor electrical connection. To address these possible causes, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins.

What are the consequences of ignoring the u0417 fault code and not fixing it in a timely manner?

Ignoring the u0417 fault code and not fixing it in a timely manner can lead to serious consequences. The engine light will remain on, indicating a problem with the park brake control module. This can cause the vehicle to fail an emissions test and reduce fuel efficiency. Additionally, the faulty module can cause the park brake to engage unexpectedly, leading to accidents. It is important to check the possible causes, visually inspect the wiring harness and connectors, and look for damaged components to fix the issue promptly.

u0417 error fault code explained

If your engine light is on, it could be due to a faulty park brake control module, an open or shorted harness, or poor electrical connection.

Check for damaged components and inspect the wiring harness and connectors for any issues.

Scroll to Top