The automobile fault code U0286 indicates a problem with the Radiator Anti Tamper Device, which can cause the Engine Light to turn on.

The possible causes of this fault code include a faulty device, an open or shorted harness, or a poor electrical connection. To fix this issue, one should visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to avoid any further damage to the vehicle.

To interpret the fault code, one can use an OBD-II scanner or take the vehicle to a mechanic for diagnosis.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be due to the u0286 fault code. Here are some symptoms to look out for:

  • The U0286 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
  • Other symptoms may include issues with the transmission, such as difficulty shifting gears or the transmission slipping.
  • The vehicle may also experience reduced power or acceleration, and the fuel efficiency may decrease.
  • Additionally, the vehicle may experience issues with the braking system, such as the brakes feeling spongy or the brake pedal vibrating.
  • Finally, the vehicle may experience issues with the stability control system, such as the system turning off or the vehicle feeling unstable while driving.

The automobile fault code u0286 can be caused by a faulty radiator anti-tamper device, open or shorted harness, or poor electrical connection.

  • The automobile fault code U0286 can be caused by a faulty Radiator Anti Tamper Device.
  • It can also be caused by an open or shorted harness of the Radiator Anti Tamper Device.
  • Additionally, a poor electrical connection in the Radiator Anti Tamper Device circuit can also trigger this fault code.

Below are some possible fixes for the automobile fault code u0286, including inspecting wiring harness and connectors for damage or corrosion.

  • To fix the automobile fault code u0286, first, check the possible causes listed above.
  • Then, visually inspect the related wiring harness and connectors.
  • Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code U0286 has an estimated repair time of 1.0 hour. The cost of fixing this fault code is influenced by the repair time.

Most auto repair shops charge between $75 and $150 per hour for their services. Therefore, the fixing cost of U0286 will range between $75 and $150, depending on the repair time required.

The U0286 code is a Controller Area Network (CAN) fault code. CAN is a vehicle bus standard designed to interconnect automotive devices without a host computer.

The code sets when a periodic message from the Radiator Anti Tamper Device has not been received. CAN bus uses two dedicated wires for communication, CAN high and CAN low. The Diagnostic Trouble Code (DTC) sets when there is a loss of communication with the Radiator Anti Tamper Device.

The CAN bus is not sensitive to inductive spikes, electrical fields, or other noise.

What are the possible causes of the u0286 fault code that triggers the engine light or service engine soon warning light?

If you see the engine light or service engine soon warning light on your dashboard, it could be due to the u0286 fault code. This code is triggered by a faulty Radiator Anti Tamper Device, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can one fix the u0286 fault code related to the faulty radiator anti-tamper device, and what steps should be taken to ensure a proper fix?

If you’re experiencing the u0286 fault code, which is related to a faulty radiator anti-tamper device, you may notice that your engine light is on. To fix this issue, start by checking the possible causes listed above. Inspect the wiring harness and connectors for any damage or corrosion. Look for broken, bent, pushed out, or corroded connector pins. By taking these steps, you can ensure a proper fix for the u0286 fault code.

What are the signs that the radiator anti-tamper device harness is open or shorted, and how can one visually inspect the related wiring harness and connectors to identify the issue?

If the engine light is on, it could be due to a faulty radiator anti-tamper device or an open or shorted harness. To identify the issue, visually inspect the related wiring harness and connectors for any damage or corrosion. Check for broken, bent, or pushed out connector pins. This will help you determine the cause of the problem and take the necessary steps to fix it.

u0286 error fault code explained

If your engine light is on, it could be due to a faulty Radiator Anti Tamper Device, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out connector pins.

Scroll to Top